Class representing 2d linear triangular element for solving incompressible fluid with SUPG solver. More...

#include <tr1_2d_supg2.h>

Inheritance diagram for oofem::TR1_2D_SUPG2:

Collaboration diagram for oofem::TR1_2D_SUPG2:

Public Member Functions
	TR1_2D_SUPG2 (int n, Domain *d)

virtual	~TR1_2D_SUPG2 ()

virtual void	computeAccelerationTerm_MB (FloatMatrix &answer, TimeStep *tStep)
	Computes acceleration terms (generalized mass matrix with stabilization terms) for momentum balance equations(s). More...

virtual void	computeAdvectionTerm_MB (FloatArray &answer, TimeStep *tStep)
	Computes nonlinear advection terms for momentum balance equations(s). More...

virtual void	computeAdvectionDerivativeTerm_MB (FloatMatrix &answer, TimeStep *tStep)
	Computes the derivative of advection terms for momentum balance equations(s) with respect to nodal velocities. More...

virtual void	computeDiffusionTerm_MB (FloatArray &answer, TimeStep *tStep)
	Computes diffusion terms for momentum balance equations(s). More...

virtual void	computeDiffusionDerivativeTerm_MB (FloatMatrix &answer, MatResponseMode mode, TimeStep *tStep)
	Computes the derivative of diffusion terms for momentum balance equations(s) with respect to nodal velocities. More...

virtual void	computePressureTerm_MB (FloatMatrix &answer, TimeStep *tStep)
	Computes pressure terms for momentum balance equations(s). More...

virtual void	computeLSICStabilizationTerm_MB (FloatMatrix &answer, TimeStep *tStep)
	Computes SLIC stabilization term for momentum balance equation(s). More...

virtual void	computeLinearAdvectionTerm_MC (FloatMatrix &answer, TimeStep *tStep)
	Computes the linear advection term for mass conservation equation. More...

virtual void	computeAdvectionTerm_MC (FloatArray &answer, TimeStep *tStep)
	Computes advection terms for mass conservation equation. More...

virtual void	computeAdvectionDerivativeTerm_MC (FloatMatrix &answer, TimeStep *tStep)
	Computes the derivative of advection terms for mass conservation equation with respect to nodal velocities. More...

virtual void	computeDiffusionDerivativeTerm_MC (FloatMatrix &answer, TimeStep *tStep)
	Computes diffusion derivative terms for mass conservation equation. More...

virtual void	computeDiffusionTerm_MC (FloatArray &answer, TimeStep *tStep)
	Computes diffusion terms for mass conservation equation. More...

virtual void	computeAccelerationTerm_MC (FloatMatrix &answer, TimeStep *tStep)
	Computes acceleration terms for mass conservation equation. More...

virtual void	computePressureTerm_MC (FloatMatrix &answer, TimeStep *tStep)
	Computes pressure terms for mass conservation equation. More...

virtual void	computeBCRhsTerm_MB (FloatArray &answer, TimeStep *tStep)
	Computes Rhs terms due to boundary conditions. More...

virtual void	computeBCRhsTerm_MC (FloatArray &answer, TimeStep *tStep)
	Computes Rhs terms due to boundary conditions. More...

virtual void	updateStabilizationCoeffs (TimeStep *tStep)
	Updates the stabilization coefficients used for CBS and SUPG algorithms. More...

virtual void	updateElementForNewInterfacePosition (TimeStep *tStep)

virtual double	computeCriticalTimeStep (TimeStep *tStep)
	Computes the critical time increment. More...

virtual const char *	giveClassName () const

virtual const char *	giveInputRecordName () const

virtual void	giveDofManDofIDMask (int inode, IntArray &answer) const
	Returns dofmanager dof mask for node. More...

virtual int	computeNumberOfDofs ()
	Computes or simply returns total number of element's local DOFs. More...

virtual IRResultType	initializeFrom (InputRecord *ir)
	Initializes receiver according to object description stored in input record. More...

virtual void	giveInputRecord (DynamicInputRecord &input)
	Setups the input record string of receiver. More...

virtual void	updateYourself (TimeStep *tStep)
	Updates element state after equilibrium in time step has been reached. More...

virtual contextIOResultType	saveContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Stores receiver state to output stream. More...

virtual contextIOResultType	restoreContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Restores the receiver state previously written in stream. More...

virtual Interface *	giveInterface (InterfaceType)
	Interface requesting service. More...

virtual int	EIPrimaryFieldI_evaluateFieldVectorAt (FloatArray &answer, PrimaryField &pf, const FloatArray &coords, IntArray &dofId, ValueModeType mode, TimeStep *tStep)
	Evaluates the value of field at given point of interest (should be located inside receiver's volume) using element interpolation. More...

virtual double	computeLEPLICVolumeFraction (const FloatArray &n, const double p, LEPlic *matInterface, bool updFlag)
	Computes corresponding volume fraction to given interface position. More...

virtual void	formMaterialVolumePoly (Polygon &matvolpoly, LEPlic *matInterface, const FloatArray &normal, const double p, bool updFlag)
	Assembles the true element material polygon (takes receiver vof into accout). More...

virtual void	formVolumeInterfacePoly (Polygon &matvolpoly, LEPlic *matInterface, const FloatArray &normal, const double p, bool updFlag)
	Assembles receiver material polygon based solely on given interface line. More...

virtual double	truncateMatVolume (const Polygon &matvolpoly, double &volume)
	Truncates given material polygon to receiver. More...

virtual void	giveElementCenter (LEPlic *mat_interface, FloatArray &center, bool updFlag)
	Computes the receiver center (in updated Lagrangian configuration). More...

virtual void	formMyVolumePoly (Polygon &myPoly, LEPlic *mat_interface, bool updFlag)
	Assembles receiver volume. More...

virtual Element *	giveElement ()
	Return number of receiver's element. More...

virtual double	computeMyVolume (LEPlic *matInterface, bool updFlag)
	Computes the volume of receiver. More...

virtual void	NodalAveragingRecoveryMI_computeNodalValue (FloatArray &answer, int node, InternalStateType type, TimeStep *tStep)
	Computes the element value in given node. More...

virtual void	SPRNodalRecoveryMI_giveSPRAssemblyPoints (IntArray &pap)

virtual void	SPRNodalRecoveryMI_giveDofMansDeterminedByPatch (IntArray &answer, int pap)

virtual int	SPRNodalRecoveryMI_giveNumberOfIP ()

virtual SPRPatchType	SPRNodalRecoveryMI_givePatchType ()

virtual int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
	Returns the integration point corresponding value in full form. More...

virtual int	giveDefaultIntegrationRule () const
	Returns id of default integration rule. More...

virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
	Access method for default integration rule. More...

int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep)
	Returns internal state variable (like stress,strain) at node of element in Reduced form, the way how is obtained is dependent on InternalValueType. More...

virtual void	drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	printOutputAt (FILE file, TimeStep tStep)
	Prints output of receiver to stream, for given time step. More...

Public Member Functions inherited from oofem::TR1_2D_SUPG
	TR1_2D_SUPG (int n, Domain *d)

virtual	~TR1_2D_SUPG ()

virtual FEInterpolation *	giveInterpolation () const

virtual void	computeLoadVector (FloatArray &answer, BodyLoad load, CharType type, ValueModeType mode, TimeStep tStep)
	Computes the contribution of the given body load (volumetric). More...

virtual void	computeSlipWithFrictionBCTerm_MB (FloatMatrix &answer, Load load, int side, TimeStep tStep)
	Computes Lhs term due to applied slip with friction bc. More...

virtual void	computePenetrationWithResistanceBCTerm_MB (FloatMatrix &answer, Load load, int side, TimeStep tStep)
	Computes Lhs contribution due to applied Penetration bc. More...

virtual void	computeOutFlowBCTerm_MB (FloatMatrix &answer, int side, TimeStep *tStep)
	Computes Lhs contribution due to outflow BC. More...

virtual void	computeHomogenizedReinforceTerm_MB (FloatMatrix &answer, Load load, TimeStep tStep)

virtual void	computeHomogenizedReinforceTerm_MC (FloatMatrix &answer, Load load, TimeStep tStep)

virtual MaterialMode	giveMaterialMode ()
	Returns material mode for receiver integration points. More...

virtual int	checkConsistency ()
	Used to check consistency and initialize some element geometry data (area,b,c). More...

virtual double	computeVolumeAround (GaussPoint *gp)
	Returns volume related to given integration point. More...

virtual double	computeCriticalLEPlicTimeStep (TimeStep *tStep)
	Computes critical time step. More...

virtual double	LS_PCS_computeF (LevelSetPCS ls, TimeStep tStep)
	Evaluates F in level set equation of the form $\phi_t + F(\nabla\phi, x) \|\nabla\phi\| = 0$ where for interface position driven by flow with speed u: $F = u\cdot \frac{\nabla\phi}{\|\nabla\phi\|}$ . More...

virtual void	LS_PCS_computedN (FloatMatrix &answer)
	Returns gradient of shape functions. More...

virtual double	LS_PCS_computeVolume ()
	Returns receiver's volume. More...

virtual double	LS_PCS_computeS (LevelSetPCS ls, TimeStep tStep)
	Evaluates S in level set equation of the form $\phi_t = S(\phi) (1-\|\nabla\phi\|) = 0$ where $S=\frac{\phi}{\sqrt{\phi^2+\epsilon^2}}$ . More...

virtual void	LS_PCS_computeVOFFractions (FloatArray &answer, FloatArray &fi)
	Returns VOF fractions for each material on element according to nodal values of level set function (passed as parameter) More...

Public Member Functions inherited from oofem::SUPGElement
	SUPGElement (int n, Domain *aDomain)

virtual	~SUPGElement ()

virtual void	giveCharacteristicMatrix (FloatMatrix &answer, CharType type, TimeStep *tStep)
	Computes characteristic matrix of receiver of requested type in given time step. More...

virtual void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep)
	Computes characteristic vector of receiver of requested type in given time step. More...

virtual void	computeBCLhsPressureTerm_MC (FloatMatrix &answer, TimeStep *tStep)
	Computes Lhs terms due to boundary conditions - pressure. More...

virtual void	computeBCLhsTerm_MB (FloatMatrix &answer, TimeStep *tStep)
	Computes Lhs terms due to boundary conditions - velocity. More...

virtual void	computeBCLhsPressureTerm_MB (FloatMatrix &answer, TimeStep *tStep)
	Computes Lhs terms due to boundary conditions - pressure. More...

virtual void	updateInternalState (TimeStep *tStep)
	Updates element state after equilibrium in time step has been reached. More...

Public Member Functions inherited from oofem::FMElement
	FMElement (int n, Domain *aDomain)

virtual	~FMElement ()

virtual void	computeVectorOfVelocities (ValueModeType mode, TimeStep *tStep, FloatArray &velocities)

virtual void	computeVectorOfPressures (ValueModeType mode, TimeStep *tStep, FloatArray &pressures)

Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Constructor. More...

	Element (const Element &src)=delete

Element &	operator= (const Element &src)=delete

virtual	~Element ()
	Virtual destructor. More...

virtual void	drawYourself (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType)

virtual void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)

virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
	Returns internal state variable (like stress,strain) at side of element in Reduced form If side is possessing DOFs, otherwise recover techniques will not work due to absence of side-shape functions. More...

virtual void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows sparse structure. More...

virtual void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness) More...

int	giveLabel () const

int	giveGlobalNumber () const

void	setGlobalNumber (int num)
	Sets receiver globally unique number. More...

elementParallelMode	giveParallelMode () const
	Return elementParallelMode of receiver. More...

void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element. More...

virtual elementParallelMode	giveKnotSpanParallelMode (int) const
	Returns the parallel mode for particular knot span of the receiver. More...

int	packUnknowns (DataStream &buff, TimeStep *tStep)
	Pack all necessary data of element (according to its parallel_mode) integration points into given communication buffer. More...

int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
	Unpack and updates all necessary data of element (according to its parallel_mode) integration points into given communication buffer. More...

int	estimatePackSize (DataStream &buff)
	Estimates the necessary pack size to hold all packed data of receiver. More...

const IntArray *	givePartitionList () const
	Returns partition list of receiver. More...

void	setPartitionList (IntArray &pl)
	Sets partition list of receiver. More...

virtual double	predictRelativeComputationalCost ()
	Returns the weight representing relative computational cost of receiver The reference element is triangular plane stress element with linear approximation, single integration point and linear isotropic material. More...

virtual double	giveRelativeSelfComputationalCost ()
	Returns the weight representing relative computational cost of receiver The reference element is triangular plane stress element. More...

virtual double	predictRelativeRedistributionCost ()
	Returns the relative redistribution cost of the receiver. More...

IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element. More...

IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element. More...

void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
	Returns the location array (array of code numbers) of receiver for given numbering scheme. More...

void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const

virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
	Returns the location array for the boundary of the element. More...

virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)

virtual int	giveNumberOfDofs ()

virtual int	giveNumberOfInternalDofManagers () const

virtual DofManager *	giveInternalDofManager (int i) const
	Returns i-th internal element dof manager of the receiver. More...

virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
	Computes characteristic value of receiver of requested type in given time step. More...

virtual void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true)
	Computes the contribution of the given load at the given boundary surface in global coordinate system. More...

virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, SurfaceLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
	Computes the tangent contribution of the given load at the given boundary. More...

virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, EdgeLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
	Computes the tangent contribution of the given load at the given boundary. More...

virtual void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad load, int edge, CharType type, ValueModeType mode, TimeStep tStep, bool global=true)
	Computes the contribution of the given load at the given boundary edge. More...

const IntArray &	giveBodyLoadList () const
	Returns receiver list of bodyloads. More...

const IntArray &	giveBoundaryLoadList () const
	Returns receiver list of boundary loads. More...

void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
	Returns local vector of unknowns. More...

void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)

void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
	Boundary version of computeVectorOf. More...

void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
	Returns local vector of unknowns. More...

void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
	Returns local vector of prescribed unknowns. More...

void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
	Returns local vector of prescribed unknowns. More...

virtual int	computeNumberOfGlobalDofs ()
	Computes the total number of element's global dofs. More...

int	computeNumberOfPrimaryMasterDofs ()
	Computes the total number of element's primary master DOFs. More...

virtual bool	computeGtoLRotationMatrix (FloatMatrix &answer)
	Returns transformation matrix from global c.s. More...

virtual bool	giveRotationMatrix (FloatMatrix &answer)
	Transformation matrices updates rotation matrix between element-local and primary DOFs, taking into account nodal c.s. More...

virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
	Returns transformation matrix for DOFs from global coordinate system to local coordinate system in nodes. More...

virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
	Returns internal dofmanager dof mask for node. More...

virtual void	giveElementDofIDMask (IntArray &answer) const
	Returns element dof mask for node. More...

virtual void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer)
	Computes the unknown vector interpolated at the specified local coordinates. More...

virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension. More...

double	computeMeanSize ()
	Computes the size of the element defined as its length. More...

virtual double	computeVolume ()
	Computes the volume. More...

virtual double	computeArea ()
	Computes the area (zero for all but 2d geometries). More...

virtual double	computeLength ()
	Computes the length (zero for all but 1D geometries) More...

virtual void	giveBoundaryEdgeNodes (IntArray &bNodes, int boundary)
	Returns list of receiver boundary nodes for given edge. More...

virtual void	giveBoundarySurfaceNodes (IntArray &bNodes, int boundary)
	Returns list of receiver boundary nodes for given surface. More...

virtual IntegrationRule *	giveBoundaryEdgeIntegrationRule (int order, int boundary)
	Returns boundary edge integration rule. More...

virtual IntegrationRule *	giveBoundarySurfaceIntegrationRule (int order, int boundary)
	Returns boundary surface integration rule. More...

int	giveDofManagerNumber (int i) const
	Translates local to global indices for dof managers. More...

const IntArray &	giveDofManArray () const

void	addDofManager (DofManager *dMan)

DofManager *	giveDofManager (int i) const

Node *	giveNode (int i) const
	Returns reference to the i-th node of element. More...

virtual ElementSide *	giveSide (int i) const
	Returns reference to the i-th side of element. More...

virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
	Returns the interpolation for the specific dof id. More...

virtual Material *	giveMaterial ()

int	giveMaterialNumber () const

CrossSection *	giveCrossSection ()

void	setMaterial (int matIndx)
	Sets the material of receiver. More...

virtual void	setCrossSection (int csIndx)
	Sets the cross section model of receiver. More...

virtual int	giveNumberOfDofManagers () const

virtual int	giveNumberOfNodes () const
	Returns number of nodes of receiver. More...

void	setDofManagers (const IntArray &dmans)
	Sets receiver dofManagers. More...

void	setBodyLoads (const IntArray &bodyLoads)
	Sets receiver bodyLoadArray. More...

void	setIntegrationRules (std::vector< std::unique_ptr< IntegrationRule > > irlist)
	Sets integration rules. More...

virtual integrationDomain	giveIntegrationDomain () const
	Returns integration domain for receiver, used to initialize integration point over receiver volume. More...

virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
	Assembles the code numbers of given integration element (sub-patch) This is done by obtaining list of nonzero shape functions and by collecting the code numbers of nodes corresponding to these shape functions. More...

int	giveRegionNumber ()

virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
	Initialization according to state given by initial conditions. More...

virtual bool	isActivated (TimeStep *tStep)

virtual bool	isCast (TimeStep *tStep)

virtual void	initForNewStep ()
	Initializes receivers state to new time step. More...

virtual Element_Geometry_Type	giveGeometryType () const
	Returns the element geometry type. More...

virtual int	giveSpatialDimension ()
	Returns the element spatial dimension (1, 2, or 3). More...

virtual int	giveNumberOfBoundarySides ()

int	giveNumberOfIntegrationRules ()

virtual IntegrationRule *	giveIntegrationRule (int i)

std::vector< std::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()

virtual int	testElementExtension (ElementExtension ext)
	Tests if the element implements required extension. More...

int	giveGlobalIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)

virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
	Default implementation returns length of element projection into specified direction. More...

virtual double	giveCharacteristicLength (const FloatArray &normalToCrackPlane)
	Returns the size of element in the given direction, in some cases adjusted (e.g. More...

double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
	Returns the size of element in the given direction if the direction is in the XY plane, otherwise gives the mean size defined as the square root of the element area. More...

double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
	Returns the size of an axisymmetric element in the given direction if the direction is in the XY plane, otherwise gives the mean distance vrom the symmetry axis multiplied by pi. More...

virtual double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method)
	Returns characteristic element size for a given integration point and given direction. More...

virtual double	giveParentElSize () const
	Returns the size (length, area or volume depending on element type) of the parent element. More...

virtual void	updateBeforeNonlocalAverage (TimeStep *tStep)
	Updates internal element state (in all integration points of receiver) before nonlocal averaging takes place. More...

virtual int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords)
	Computes the global coordinates from given element's local coordinates. More...

virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
	Computes the element local coordinates from given global coordinates. More...

virtual int	giveLocalCoordinateSystem (FloatMatrix &answer)
	Returns local coordinate system of receiver Required by material models with ortho- and anisotrophy. More...

virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
	Computes mid-plane normal of receiver at integration point. More...

virtual int	adaptiveMap (Domain oldd, TimeStep tStep)
	Initializes the internal state variables stored in all IPs according to state in given domain. More...

virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
	Maps the internal state variables stored in all IPs from the old domain to the new domain. More...

virtual int	adaptiveUpdate (TimeStep *tStep)
	Updates the internal state variables stored in all IPs according to already mapped state. More...

virtual int	adaptiveFinish (TimeStep *tStep)
	Finishes the mapping for given time step. More...

virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
	Local renumbering support. More...

template<class T >
void	ipEvaluator (T src, void(T::f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f. More...

template<class T , class S >
void	ipEvaluator (T src, void(T::f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array. More...

Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
	Regular constructor, creates component with given number and belonging to given domain. More...

virtual	~FEMComponent ()
	Virtual destructor. More...

Domain *	giveDomain () const

virtual void	setDomain (Domain *d)
	Sets associated Domain. More...

int	giveNumber () const

void	setNumber (int num)
	Sets number of receiver. More...

virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging. More...

std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros). More...

Public Member Functions inherited from oofem::SpatialLocalizerInterface
	SpatialLocalizerInterface (Element *element)

virtual int	SpatialLocalizerI_containsPoint (const FloatArray &coords)
	Checks if element contains specified coordinate. More...

int	SpatialLocalizerI_BBoxContainsPoint (const FloatArray &coords)
	Creates a bounding box of the nodes and checks if it includes the given coordinate. More...

virtual void	SpatialLocalizerI_giveBBox (FloatArray &bb0, FloatArray &bb1)
	Creates a bounding box of the nodes and checks if it includes the given coordinate. More...

virtual double	SpatialLocalizerI_giveClosestPoint (FloatArray &lcoords, FloatArray &closest, const FloatArray &gcoords)
	Gives the closest point on the element. More...

Public Member Functions inherited from oofem::Interface
	Interface ()
	Constructor. More...

virtual	~Interface ()

Public Member Functions inherited from oofem::EIPrimaryFieldInterface
	EIPrimaryFieldInterface ()

Public Member Functions inherited from oofem::ZZNodalRecoveryModelInterface
	ZZNodalRecoveryModelInterface (Element *element)
	Constructor. More...

virtual bool	ZZNodalRecoveryMI_computeNValProduct (FloatMatrix &answer, InternalStateType type, TimeStep *tStep)
	Computes the element contribution to $\int_\Omega N^{\mathrm{T}}\alpha\;\mathrm{d}\Omega$ , where $\alpha$ is quantity to be recovered (for example stress or strain vector). More...

virtual void	ZZNodalRecoveryMI_computeNNMatrix (FloatArray &answer, InternalStateType type)
	Computes the element contribution to $\int_\Omega N^{\mathrm{T}} \cdot N\;\mathrm{d}\Omega$ term. More...

Public Member Functions inherited from oofem::NodalAveragingRecoveryModelInterface
	NodalAveragingRecoveryModelInterface ()
	Constructor. More...

Public Member Functions inherited from oofem::SPRNodalRecoveryModelInterface
	SPRNodalRecoveryModelInterface ()
	Constructor. More...

Public Member Functions inherited from oofem::LEPlicElementInterface
	LEPlicElementInterface ()

void	setTempLineConstant (double tp)

void	setTempInterfaceNormal (FloatArray tg)

void	setTempVolumeFraction (double v)

void	setPermanentVolumeFraction (double v)

void	addTempVolumeFraction (double v)

double	giveVolumeFraction ()

double	giveTempVolumeFraction ()

void	giveTempInterfaceNormal (FloatArray &n)

double	giveTempLineConstant ()

void	updateYourself (TimeStep *tStep)

contextIOResultType	saveContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Stores context of receiver into given stream. More...

contextIOResultType	restoreContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Restores context of receiver from given stream. More...

bool	isBoundary ()
	Returns true if cell is boundary. More...

Public Member Functions inherited from oofem::LevelSetPCSElementInterface
	LevelSetPCSElementInterface ()

Protected Member Functions
virtual void	computeGaussPoints ()
	Initializes the array of integration rules member variable. More...

virtual void	postInitialize ()
	Performs post initialization steps. More...

virtual void	computeDeviatoricStress (FloatArray &answer, GaussPoint gp, TimeStep )

void	computeNVector (FloatArray &answer, GaussPoint *gp)

virtual void	updateVolumePolygons (Polygon &referenceFluidPoly, Polygon &secondFluidPoly, int &rfPoints, int &sfPoints, const FloatArray &normal, const double p, bool updFlag)

double	computeVolumeAroundID (GaussPoint *gp, integrationDomain id, const std::vector< FloatArray > &idpoly)

void	updateIntegrationRules ()

Material *	_giveMaterial (int indx)

Protected Member Functions inherited from oofem::TR1_2D_SUPG
virtual void	giveLocalVelocityDofMap (IntArray &map)

virtual void	giveLocalPressureDofMap (IntArray &map)

void	computeNMtrx (FloatArray &answer, GaussPoint *gp)

virtual void	computeDeviatoricStrain (FloatArray &answer, GaussPoint gp, TimeStep tStep)

virtual void	initGeometry ()

Protected Attributes
Polygon	myPoly [2]
	myPoly[0] occupied by reference fluid. More...

std::vector< FloatArray >	vcoords [2]

integrationDomain	id [2]

int	mat [2]
	mat[0] reference fluid. More...

std::unique_ptr< IntegrationRule >	defaultIRule
	default integration rule over element volume. More...

Protected Attributes inherited from oofem::TR1_2D_SUPG
double	b [3]

double	c [3]

double	area

Protected Attributes inherited from oofem::SUPGElement
IntArray	boundarySides
	Array of boundary sides. More...

IntArray	boundaryCodes
	Boundary sides codes. More...

double	t_supg
	Stabilization coefficients, updated for each solution step in updateStabilizationCoeffs() More...

double	t_pspg

double	t_lsic

Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers. More...

IntArray	dofManArray
	Array containing dofmanager numbers. More...

int	material
	Number of associated material. More...

int	crossSection
	Number of associated cross section. More...

IntArray	bodyLoadArray
	Array containing indexes of loads (body loads and boundary loads are kept separately), that apply on receiver. More...

IntArray	boundaryLoadArray

std::vector< std::unique_ptr< IntegrationRule > >	integrationRulesArray
	List of integration rules of receiver (each integration rule contains associated integration points also). More...

FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation. More...

int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element. More...

int	globalNumber
	In parallel mode, globalNumber contains globally unique DoFManager number. More...

int	numberOfGaussPoints
	Number of integration points as specified by nip. More...

elementParallelMode	parallel_mode
	Determines the parallel mode of the element. More...

IntArray	partitions
	List of partition sharing the shared element or remote partition containing remote element counterpart. More...

Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number. More...

Domain *	domain
	Link to domain object, useful for communicating with other FEM components. More...

Protected Attributes inherited from oofem::LEPlicElementInterface
bool	permanentVofFlag

double	vof
	Volume fraction of reference fluid in element. More...

double	temp_vof

double	p
	Line constant of line segment representing interface. More...

double	temp_p

FloatArray	normal
	Interface segment normal. More...

FloatArray	temp_normal

Additional Inherited Members
Static Protected Attributes inherited from oofem::TR1_2D_SUPG
static FEI2dTrLin	interp

Detailed Description

Class representing 2d linear triangular element for solving incompressible fluid with SUPG solver.

This class is similar to TR1_2D_SUPG, but the difference is in handling multiple fluids. This class uses the interface position within an element to perform an integration for each fluid separately when evaluating contributing terms. It does not rely on rule of mixture which interpolates the properties using VOF value, but uses separate integration on each fluid volume.

Todo:: Save & restore context will not work (some way how to save/restore dynamic integration rules have to be found: element has to restore these rules based on restored data, and then rules will be restored, or integration rule can store more info about gauss points if desired (when dynamic).

Todo:: Integrate sub_IPRule as ordinary element integration rule.

Definition at line 65 of file tr1_2d_supg2.h.

Constructor & Destructor Documentation

oofem::TR1_2D_SUPG2::TR1_2D_SUPG2	(	int	n,
		Domain *	d
	)

Definition at line 72 of file tr1_2d_supg2.C.

References oofem::Element::numberOfDofMans.

oofem::TR1_2D_SUPG2::~TR1_2D_SUPG2 ( )

virtual

Definition at line 78 of file tr1_2d_supg2.C.

Member Function Documentation

Material* oofem::TR1_2D_SUPG2::_giveMaterial ( int indx )

inlineprotected

Definition at line 182 of file tr1_2d_supg2.h.

References oofem::FEMComponent::domain, and oofem::Domain::giveMaterial().

Referenced by computeAccelerationTerm_MB(), computeAdvectionDerivativeTerm_MB(), computeAdvectionTerm_MB(), computeBCRhsTerm_MB(), computeDeviatoricStress(), computeDiffusionDerivativeTerm_MB(), computeDiffusionTerm_MB(), computeLSICStabilizationTerm_MB(), computePressureTerm_MC(), printOutputAt(), and updateStabilizationCoeffs().

void oofem::TR1_2D_SUPG2::computeAccelerationTerm_MB	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes acceleration terms (generalized mass matrix with stabilization terms) for momentum balance equations(s).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 190 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatArray::at(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::TR1_2D_SUPG::computeAccelerationTerm_MB(), computeNVector(), oofem::FMElement::computeVectorOfVelocities(), computeVolumeAroundID(), oofem::Material::give(), oofem::TimeStep::givePreviousStep(), oofem::Element::integrationRulesArray, OOFEM_ERROR, oofem::FloatMatrix::resize(), oofem::SUPGElement::t_supg, vcoords, and oofem::FloatMatrix::zero().

void oofem::TR1_2D_SUPG2::computeAccelerationTerm_MC	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes acceleration terms for mass conservation equation.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 763 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::computeAccelerationTerm_MC().

Referenced by computeDiffusionTerm_MC().

void oofem::TR1_2D_SUPG2::computeAdvectionDerivativeTerm_MB	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes the derivative of advection terms for momentum balance equations(s) with respect to nodal velocities.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 367 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatArray::at(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::TR1_2D_SUPG::computeAdvectionDerivativeTerm_MB(), computeNVector(), oofem::FMElement::computeVectorOfVelocities(), computeVolumeAroundID(), oofem::Material::give(), oofem::TimeStep::givePreviousStep(), oofem::Element::integrationRulesArray, OOFEM_ERROR, oofem::FloatMatrix::resize(), oofem::SUPGElement::t_supg, vcoords, and oofem::FloatMatrix::zero().

Referenced by computeAdvectionTerm_MB().

void oofem::TR1_2D_SUPG2::computeAdvectionDerivativeTerm_MC	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes the derivative of advection terms for mass conservation equation with respect to nodal velocities.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 722 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::area, oofem::FloatArray::at(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::FMElement::computeVectorOfVelocities(), oofem::TimeStep::givePreviousStep(), oofem::FloatMatrix::resize(), oofem::SUPGElement::t_pspg, and oofem::FloatMatrix::zero().

void oofem::TR1_2D_SUPG2::computeAdvectionTerm_MB	(	FloatArray &	answer,
		TimeStep *	tStep
	)

virtual

Computes nonlinear advection terms for momentum balance equations(s).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 286 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatArray::at(), oofem::TR1_2D_SUPG::b, oofem::FloatArray::beProductOf(), oofem::TR1_2D_SUPG::c, computeAdvectionDerivativeTerm_MB(), oofem::TR1_2D_SUPG::computeAdvectionTerm_MB(), computeNVector(), oofem::FMElement::computeVectorOfVelocities(), computeVolumeAroundID(), oofem::Material::give(), oofem::TimeStep::givePreviousStep(), oofem::Element::integrationRulesArray, oofem::FEMComponent::number, OOFEM_ERROR, oofem::FloatArray::resize(), oofem::SUPGElement::t_supg, vcoords, and oofem::FloatArray::zero().

void oofem::TR1_2D_SUPG2::computeAdvectionTerm_MC	(	FloatArray &	answer,
		TimeStep *	tStep
	)

virtual

Computes advection terms for mass conservation equation.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 695 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::area, oofem::FloatArray::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::FMElement::computeVectorOfVelocities(), oofem::TimeStep::givePreviousStep(), oofem::FloatArray::resize(), and oofem::SUPGElement::t_pspg.

void oofem::TR1_2D_SUPG2::computeBCRhsTerm_MB	(	FloatArray &	answer,
		TimeStep *	tStep
	)

virtual

Computes Rhs terms due to boundary conditions.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 809 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::IntArray::at(), oofem::FloatArray::at(), oofem::TR1_2D_SUPG::b, oofem::Element::bodyLoadArray, oofem::BodyLoadBGT, oofem::Element::boundaryLoadArray, oofem::TR1_2D_SUPG::c, oofem::TR1_2D_SUPG::computeBCRhsTerm_MB(), oofem::Load::computeComponentArrayAt(), computeNVector(), oofem::BoundaryLoad::computeValueAt(), oofem::FMElement::computeVectorOfVelocities(), computeVolumeAroundID(), oofem::FEMComponent::domain, oofem::ForceLoadBVT, oofem::Material::give(), oofem::GeneralBoundaryCondition::giveBCGeoType(), oofem::GeneralBoundaryCondition::giveBCValType(), oofem::Element::giveBodyLoadArray(), oofem::Element::giveBoundaryLoadArray(), oofem::Node::giveCoordinate(), oofem::Domain::giveLoad(), oofem::Element::giveNode(), oofem::TimeStep::givePreviousStep(), oofem::IntArray::giveSize(), oofem::FloatArray::giveSize(), id, oofem::Element::integrationRulesArray, OOFEM_ERROR, oofem::FloatArray::resize(), oofem::SUPGElement::t_supg, vcoords, and oofem::FloatArray::zero().

Referenced by computeDiffusionTerm_MC().

void oofem::TR1_2D_SUPG2::computeBCRhsTerm_MC	(	FloatArray &	answer,
		TimeStep *	tStep
	)

virtual

Computes Rhs terms due to boundary conditions.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 908 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::computeBCRhsTerm_MC().

Referenced by computeDiffusionTerm_MC().

double oofem::TR1_2D_SUPG2::computeCriticalTimeStep ( TimeStep * tStep )

virtual

Computes the critical time increment.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1175 of file tr1_2d_supg2.C.

Referenced by updateElementForNewInterfacePosition().

void oofem::TR1_2D_SUPG2::computeDeviatoricStress	(	FloatArray &	answer,
		GaussPoint *	gp,
		TimeStep *	tStep
	)

protectedvirtual

Reimplemented from oofem::SUPGElement.

Definition at line 1203 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatArray::at(), oofem::TR1_2D_SUPG::computeDeviatoricStrain(), oofem::FloatArray::resize(), and oofem::LEPlicElementInterface::temp_vof.

Referenced by giveDefaultIntegrationRulePtr().

void oofem::TR1_2D_SUPG2::computeDiffusionDerivativeTerm_MB	(	FloatMatrix &	answer,
		MatResponseMode	mode,
		TimeStep *	tStep
	)

virtual

Computes the derivative of diffusion terms for momentum balance equations(s) with respect to nodal velocities.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 511 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::FloatMatrix::beProductOf(), oofem::TR1_2D_SUPG::c, oofem::TR1_2D_SUPG::computeDiffusionDerivativeTerm_MB(), computeVolumeAroundID(), oofem::FEMComponent::domain, oofem::FluidDynamicMaterial::giveDeviatoricStiffnessMatrix(), oofem::Domain::giveEngngModel(), oofem::Element::integrationRulesArray, mat, OOFEM_ERROR, oofem::FloatMatrix::plusProductSymmUpper(), oofem::FloatMatrix::resize(), oofem::FloatMatrix::symmetrized(), oofem::FloatMatrix::times(), vcoords, and oofem::FloatMatrix::zero().

virtual void oofem::TR1_2D_SUPG2::computeDiffusionDerivativeTerm_MC	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

inlinevirtual

Computes diffusion derivative terms for mass conservation equation.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 101 of file tr1_2d_supg2.h.

References oofem::FloatMatrix::resize(), and oofem::FloatMatrix::zero().

void oofem::TR1_2D_SUPG2::computeDiffusionTerm_MB	(	FloatArray &	answer,
		TimeStep *	tStep
	)

virtual

Computes diffusion terms for momentum balance equations(s).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 448 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatArray::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::FluidDynamicMaterial::computeDeviatoricStressVector(), oofem::TR1_2D_SUPG::computeDiffusionTerm_MB(), oofem::FMElement::computeVectorOfVelocities(), computeVolumeAroundID(), oofem::FEMComponent::domain, oofem::Domain::giveEngngModel(), oofem::Element::integrationRulesArray, mat, OOFEM_ERROR, oofem::FloatArray::resize(), oofem::FloatArray::times(), vcoords, and oofem::FloatArray::zero().

virtual void oofem::TR1_2D_SUPG2::computeDiffusionTerm_MC	(	FloatArray &	answer,
		TimeStep *	tStep
	)

inlinevirtual

Computes diffusion terms for mass conservation equation.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 105 of file tr1_2d_supg2.h.

References computeAccelerationTerm_MC(), computeBCRhsTerm_MB(), computeBCRhsTerm_MC(), computePressureTerm_MC(), oofem::FloatArray::resize(), updateStabilizationCoeffs(), and oofem::FloatArray::zero().

void oofem::TR1_2D_SUPG2::computeGaussPoints ( )

protectedvirtual

Initializes the array of integration rules member variable.

Element can have multiple integration rules for different tasks. For example structural element family class uses this feature to implement transparent support for reduced and selective integration of some strain components. Must be defined by terminator classes.

See also: IntegrationRule

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 158 of file tr1_2d_supg2.C.

References defaultIRule, oofem::Element::giveCrossSection(), oofem::Element::integrationRulesArray, and oofem::CrossSection::setupIntegrationPoints().

Referenced by giveDefaultIntegrationRulePtr(), and postInitialize().

double oofem::TR1_2D_SUPG2::computeLEPLICVolumeFraction	(	const FloatArray &	n,
		const double	p,
		LEPlic *	matInterface,
		bool	updFlag
	)

virtual

Computes corresponding volume fraction to given interface position.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1255 of file tr1_2d_supg2.C.

References computeMyVolume(), oofem::Polygon::computeVolume(), formVolumeInterfacePoly(), and OOFEM_WARNING.

Referenced by giveInputRecordName().

void oofem::TR1_2D_SUPG2::computeLinearAdvectionTerm_MC	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes the linear advection term for mass conservation equation.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 689 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::computeLinearAdvectionTerm_MC().

void oofem::TR1_2D_SUPG2::computeLSICStabilizationTerm_MB	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes SLIC stabilization term for momentum balance equation(s).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 646 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::TR1_2D_SUPG::computeLSICStabilizationTerm_MB(), computeVolumeAroundID(), oofem::Material::give(), oofem::Element::integrationRulesArray, OOFEM_ERROR, oofem::FloatMatrix::resize(), oofem::SUPGElement::t_lsic, vcoords, and oofem::FloatMatrix::zero().

double oofem::TR1_2D_SUPG2::computeMyVolume	(	LEPlic *	matInterface,
		bool	updFlag
	)

virtual

Computes the volume of receiver.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1560 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::area, oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), oofem::LEPlic::giveUpdatedXCoordinate(), and oofem::LEPlic::giveUpdatedYCoordinate().

Referenced by computeLEPLICVolumeFraction(), and giveElement().

int oofem::TR1_2D_SUPG2::computeNumberOfDofs ( )

virtual

Computes or simply returns total number of element's local DOFs.

Must be defined by particular element.

Returns: Number of local DOFs of element.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 91 of file tr1_2d_supg2.C.

Referenced by giveInputRecordName().

void oofem::TR1_2D_SUPG2::computeNVector	(	FloatArray &	answer,
		GaussPoint *	gp
	)

protected

Definition at line 84 of file tr1_2d_supg2.C.

References oofem::FEI2dTrLin::evalN(), oofem::GaussPoint::giveNaturalCoordinates(), and oofem::TR1_2D_SUPG::interp.

Referenced by computeAccelerationTerm_MB(), computeAdvectionDerivativeTerm_MB(), computeAdvectionTerm_MB(), computeBCRhsTerm_MB(), giveDefaultIntegrationRulePtr(), and updateStabilizationCoeffs().

void oofem::TR1_2D_SUPG2::computePressureTerm_MB	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes pressure terms for momentum balance equations(s).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 591 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::area, oofem::FloatArray::at(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::FMElement::computeVectorOfPressures(), oofem::FMElement::computeVectorOfVelocities(), oofem::TimeStep::givePreviousStep(), oofem::LEPlicElementInterface::p, oofem::FloatMatrix::resize(), oofem::SUPGElement::t_supg, and oofem::FloatMatrix::zero().

void oofem::TR1_2D_SUPG2::computePressureTerm_MC	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

virtual

Computes pressure terms for mass conservation equation.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 769 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::TR1_2D_SUPG::c, oofem::TR1_2D_SUPG::computePressureTerm_MC(), computeVolumeAroundID(), oofem::Material::give(), oofem::Element::integrationRulesArray, OOFEM_ERROR, oofem::FloatMatrix::resize(), oofem::SUPGElement::t_pspg, vcoords, and oofem::FloatMatrix::zero().

Referenced by computeDiffusionTerm_MC().

double oofem::TR1_2D_SUPG2::computeVolumeAroundID	(	GaussPoint *	gp,
		integrationDomain	id,
		const std::vector< FloatArray > &	idpoly
	)

protected

Definition at line 1763 of file tr1_2d_supg2.C.

References oofem::_Triangle, oofem::GaussPoint::giveSubPatchCoordinates(), oofem::FEI2dTrLin::giveTransformationJacobian(), oofem::FEInterpolation::giveTransformationJacobian(), and oofem::GaussPoint::giveWeight().

Referenced by computeAccelerationTerm_MB(), computeAdvectionDerivativeTerm_MB(), computeAdvectionTerm_MB(), computeBCRhsTerm_MB(), computeDiffusionDerivativeTerm_MB(), computeDiffusionTerm_MB(), computeLSICStabilizationTerm_MB(), computePressureTerm_MC(), giveDefaultIntegrationRulePtr(), updateIntegrationRules(), and updateStabilizationCoeffs().

void oofem::TR1_2D_SUPG2::drawRawGeometry	(	oofegGraphicContext &	gc,
		TimeStep *	tStep
	)

virtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1931 of file tr1_2d_supg2.C.

References oofem::oofegGraphicContext::getElementColor(), oofem::oofegGraphicContext::getElementEdgeColor(), oofem::Node::giveCoordinate(), oofem::Element::giveNode(), OOFEG_RAW_GEOMETRY_LAYER, OOFEG_RAW_GEOMETRY_WIDTH, oofem::LEPlicElementInterface::p, and oofem::oofegGraphicContext::testElementGraphicActivity().

Referenced by giveDefaultIntegrationRulePtr().

void oofem::TR1_2D_SUPG2::drawScalar	(	oofegGraphicContext &	gc,
		TimeStep *	tStep
	)

virtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1961 of file tr1_2d_supg2.C.

Referenced by giveDefaultIntegrationRulePtr().

int oofem::TR1_2D_SUPG2::EIPrimaryFieldI_evaluateFieldVectorAt	(	FloatArray &	answer,
		PrimaryField &	pf,
		const FloatArray &	coords,
		IntArray &	dofId,
		ValueModeType	mode,
		TimeStep *	tStep
	)

virtual

Evaluates the value of field at given point of interest (should be located inside receiver's volume) using element interpolation.

Todo:

This should use local coordinates instead of having all elements search for it manually.

Shouldn't this just be part of Element? It's very much the core of functionality for elements.

Parameters

answer	Field evaluated at coordinate.
pf	Field to use for evaluation.
coords	Coordinate.
dofId	IDs of DOFs to evaluate.
mode	Mode of field.
tStep	Time step to evaluate at.

Returns: Zero if ok, nonzero when error encountered.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1600 of file tr1_2d_supg2.C.

References oofem::IntArray::at(), oofem::FloatArray::at(), oofem::Element::computeLocalCoordinates(), oofem::Element::computeVectorOf(), oofem::IntArray::findFirstIndexOf(), oofem::Element::giveElementDofIDMask(), oofem::IntArray::giveSize(), OOFEM_ERROR, and oofem::FloatArray::resize().

Referenced by giveInputRecordName().

void oofem::TR1_2D_SUPG2::formMaterialVolumePoly	(	Polygon &	matvolpoly,
		LEPlic *	matInterface,
		const FloatArray &	normal,
		const double	p,
		bool	updFlag
	)

virtual

Assembles the true element material polygon (takes receiver vof into accout).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1270 of file tr1_2d_supg2.C.

References oofem::Polygon::addVertex(), oofem::Polygon::clear(), formVolumeInterfacePoly(), oofem::Node::giveCoordinate(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), oofem::LEPlic::giveUpdatedXCoordinate(), oofem::LEPlic::giveUpdatedYCoordinate(), oofem::Vertex::setCoords(), TRSUPG_ZERO_VOF, and oofem::LEPlicElementInterface::vof.

Referenced by drawScalar(), and giveInputRecordName().

void oofem::TR1_2D_SUPG2::formMyVolumePoly	(	Polygon &	myPoly,
		LEPlic *	mat_interface,
		bool	updFlag
	)

virtual

Assembles receiver volume.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1537 of file tr1_2d_supg2.C.

References oofem::Polygon::addVertex(), oofem::Polygon::clear(), oofem::Node::giveCoordinate(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), oofem::LEPlic::giveUpdatedXCoordinate(), oofem::LEPlic::giveUpdatedYCoordinate(), and oofem::Vertex::setCoords().

Referenced by giveInputRecordName(), and truncateMatVolume().

void oofem::TR1_2D_SUPG2::formVolumeInterfacePoly	(	Polygon &	matvolpoly,
		LEPlic *	matInterface,
		const FloatArray &	normal,
		const double	p,
		bool	updFlag
	)

virtual

Assembles receiver material polygon based solely on given interface line.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1302 of file tr1_2d_supg2.C.

References oofem::Polygon::addVertex(), oofem::FloatArray::at(), oofem::Polygon::clear(), oofem::Node::giveCoordinate(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), oofem::LEPlic::giveUpdatedXCoordinate(), oofem::LEPlic::giveUpdatedYCoordinate(), and oofem::Vertex::setCoords().

Referenced by computeLEPLICVolumeFraction(), formMaterialVolumePoly(), and giveInputRecordName().

virtual const char* oofem::TR1_2D_SUPG2::giveClassName ( ) const

inlinevirtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 119 of file tr1_2d_supg2.h.

virtual int oofem::TR1_2D_SUPG2::giveDefaultIntegrationRule ( ) const

inlinevirtual

Returns id of default integration rule.

Various element types can use different integration rules for implementation of selective or reduced integration of selected components. One particular integration rule from defined integration rules is default. There may be some operations (defined by parent analysis type class) which use default integration rule.

Returns: Id of default integration rule. (index into integrationRulesArray).

Reimplemented from oofem::Element.

Definition at line 157 of file tr1_2d_supg2.h.

virtual IntegrationRule* oofem::TR1_2D_SUPG2::giveDefaultIntegrationRulePtr ( )

inlinevirtual

Access method for default integration rule.

Returns: Pointer to default integration rule.

See also: giveDefaultIntegrationRule

Reimplemented from oofem::Element.

Definition at line 158 of file tr1_2d_supg2.h.

References computeDeviatoricStress(), computeGaussPoints(), computeNVector(), computeVolumeAroundID(), drawRawGeometry(), drawScalar(), gc, giveInternalStateAtNode(), postInitialize(), printOutputAt(), updateIntegrationRules(), and updateVolumePolygons().

void oofem::TR1_2D_SUPG2::giveDofManDofIDMask	(	int	inode,
		IntArray &	answer
	)		const

virtual

Returns dofmanager dof mask for node.

This mask defines the dofs which are used by element in node. Mask influences the code number ordering for particular node. Code numbers are ordered according to node order and dofs belonging to particular node are ordered according to this mask. If element requests dofs using node mask which are not in node then error is generated. This masking allows node to be shared by different elements with different dofs in same node. Elements local code numbers are extracted from node using this mask. Must be defined by particular element.

Parameters

inode	Mask is computed for local dofmanager with inode number.
answer	Mask for node.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 97 of file tr1_2d_supg2.C.

Referenced by giveInputRecordName().

virtual Element* oofem::TR1_2D_SUPG2::giveElement ( )

inlinevirtual

Return number of receiver's element.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 145 of file tr1_2d_supg2.h.

References computeMyVolume(), giveIPValue(), NodalAveragingRecoveryMI_computeNodalValue(), SPRNodalRecoveryMI_giveDofMansDeterminedByPatch(), SPRNodalRecoveryMI_giveNumberOfIP(), SPRNodalRecoveryMI_givePatchType(), and SPRNodalRecoveryMI_giveSPRAssemblyPoints().

void oofem::TR1_2D_SUPG2::giveElementCenter	(	LEPlic *	mat_interface,
		FloatArray &	center,
		bool	updFlag
	)

virtual

Computes the receiver center (in updated Lagrangian configuration).

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1578 of file tr1_2d_supg2.C.

References oofem::FloatArray::add(), oofem::FloatArray::at(), oofem::Node::giveCoordinate(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), oofem::LEPlic::giveUpdatedCoordinate(), oofem::FloatArray::resize(), oofem::FloatArray::times(), and oofem::FloatArray::zero().

Referenced by giveInputRecordName().

void oofem::TR1_2D_SUPG2::giveInputRecord ( DynamicInputRecord & input )

virtual

Setups the input record string of receiver.

Parameters

input Dynamic input record to be filled by receiver.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 134 of file tr1_2d_supg2.C.

References _IFT_Tr1SUPG2_mat0, _IFT_Tr1SUPG2_mat1, _IFT_Tr1SUPG_pvof, _IFT_Tr1SUPG_vof, oofem::SUPGElement::giveInputRecord(), mat, oofem::LEPlicElementInterface::permanentVofFlag, oofem::DynamicInputRecord::setField(), and oofem::LEPlicElementInterface::vof.

Referenced by giveInputRecordName().

virtual const char* oofem::TR1_2D_SUPG2::giveInputRecordName ( ) const

inlinevirtual

Returns: Input record name of the receiver.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 120 of file tr1_2d_supg2.h.

References _IFT_TR1_2D_SUPG2_Name, computeLEPLICVolumeFraction(), computeNumberOfDofs(), EIPrimaryFieldI_evaluateFieldVectorAt(), formMaterialVolumePoly(), formMyVolumePoly(), formVolumeInterfacePoly(), giveDofManDofIDMask(), giveElementCenter(), giveInputRecord(), giveInterface(), initializeFrom(), oofem::LEPlicElementInterface::normal, oofem::LEPlicElementInterface::p, restoreContext(), saveContext(), truncateMatVolume(), and updateYourself().

Interface * oofem::TR1_2D_SUPG2::giveInterface ( InterfaceType t )

virtual

Interface requesting service.

See also: InterfaceType

Returns: Requested interface if implemented, otherwise NULL.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1182 of file tr1_2d_supg2.C.

References oofem::EIPrimaryFieldInterfaceType, oofem::LEPlicElementInterfaceType, oofem::NodalAveragingRecoveryModelInterfaceType, oofem::SpatialLocalizerInterfaceType, oofem::SPRNodalRecoveryModelInterfaceType, and oofem::ZZNodalRecoveryModelInterfaceType.

Referenced by giveInputRecordName().

int oofem::TR1_2D_SUPG2::giveInternalStateAtNode	(	FloatArray &	answer,
		InternalStateType	type,
		InternalStateMode	mode,
		int	node,
		TimeStep *	tStep
	)

virtual

Returns internal state variable (like stress,strain) at node of element in Reduced form, the way how is obtained is dependent on InternalValueType.

The value may be local, or smoothed using some recovery technique. Returns zero if element is unable to respond to request.

Parameters

answer	Contains result, zero sized if not supported.
type	Determines the internal variable requested (physical meaning).
mode	Determines the mode of variable (recovered, local, ...).
node	Node number, for which variable is required.
tStep	Time step.

Returns: Nonzero if o.k, zero otherwise.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1913 of file tr1_2d_supg2.C.

References oofem::SUPGElement::giveInternalStateAtNode().

Referenced by drawScalar(), and giveDefaultIntegrationRulePtr().

int oofem::TR1_2D_SUPG2::giveIPValue	(	FloatArray &	answer,
		GaussPoint *	gp,
		InternalStateType	type,
		TimeStep *	tStep
	)

virtual

Returns the integration point corresponding value in full form.

Parameters

answer	Contain corresponding integration point value, zero sized if not available.
gp	Integration point to check.
type	Determines the type of internal variable.
tStep	Time step.

Returns: Nonzero if o.k, zero otherwise.

Todo:: Which "error type" should be used? Why are there several? I don't see the point of this enum when there could be different function calls just as well (and different IST values)

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1785 of file tr1_2d_supg2.C.

References oofem::FloatArray::at(), oofem::TR1_2D_SUPG::giveIPValue(), oofem::LEPlicElementInterface::giveTempVolumeFraction(), and oofem::FloatArray::resize().

Referenced by drawScalar(), giveElement(), and NodalAveragingRecoveryMI_computeNodalValue().

IRResultType oofem::TR1_2D_SUPG2::initializeFrom ( InputRecord * ir )

virtual

Initializes receiver according to object description stored in input record.

This function is called immediately after creating object using constructor. Input record can be imagined as data record in component database belonging to receiver. Receiver may use value-name extracting functions to extract particular field from record.

See also: IR_GIVE_FIELD; IR_GIVE_OPTIONAL_FIELD

Parameters

ir	Input record to initialize from.

Returns: IRResultType

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 103 of file tr1_2d_supg2.C.

References _IFT_Tr1SUPG2_mat0, _IFT_Tr1SUPG2_mat1, _IFT_Tr1SUPG_pvof, _IFT_Tr1SUPG_vof, oofem::SUPGElement::initializeFrom(), IR_GIVE_OPTIONAL_FIELD, oofem::IRRT_OK, mat, oofem::Element::material, oofem::LEPlicElementInterface::setPermanentVolumeFraction(), oofem::LEPlicElementInterface::temp_vof, and oofem::LEPlicElementInterface::vof.

Referenced by giveInputRecordName().

void oofem::TR1_2D_SUPG2::NodalAveragingRecoveryMI_computeNodalValue	(	FloatArray &	answer,
		int	node,
		InternalStateType	type,
		TimeStep *	tStep
	)

virtual

Computes the element value in given node.

Parameters

answer	Contains the result.
node	Element node number.
type	Determines the type of internal variable to be recovered.
tStep	Time step.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1797 of file tr1_2d_supg2.C.

References giveIPValue(), and oofem::Element::integrationRulesArray.

Referenced by giveElement().

void oofem::TR1_2D_SUPG2::postInitialize ( )

protectedvirtual

Performs post initialization steps.

Reimplemented from oofem::Element.

Definition at line 149 of file tr1_2d_supg2.C.

References computeGaussPoints(), oofem::TR1_2D_SUPG::initGeometry(), and updateIntegrationRules().

Referenced by giveDefaultIntegrationRulePtr().

void oofem::TR1_2D_SUPG2::printOutputAt	(	FILE *	file,
		TimeStep *	tStep
	)

virtual

Prints output of receiver to stream, for given time step.

This is used for output into the standard output file.

Parameters

file	File pointer to print to.
tStep	Time step to write for.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1847 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::Material::give(), oofem::LEPlicElementInterface::giveVolumeFraction(), oofem::Element::integrationRulesArray, oofem::Element::printOutputAt(), and oofem::LEPlicElementInterface::vof.

Referenced by giveDefaultIntegrationRulePtr().

contextIOResultType oofem::TR1_2D_SUPG2::restoreContext	(	DataStream &	stream,
		ContextMode	mode,
		void *	obj = `NULL`
	)

virtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).
obj	Special parameter for sending extra information.

Returns: contextIOResultType.

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1888 of file tr1_2d_supg2.C.

References oofem::CIO_OK, oofem::LEPlicElementInterface::restoreContext(), oofem::Element::restoreContext(), and THROW_CIOERR.

Referenced by giveInputRecordName().

contextIOResultType oofem::TR1_2D_SUPG2::saveContext	(	DataStream &	stream,
		ContextMode	mode,
		void *	obj = `NULL`
	)

virtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).
obj	Special parameter, used only to send particular integration point to material class version of this method.

Returns: contextIOResultType.

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1867 of file tr1_2d_supg2.C.

References oofem::CIO_OK, oofem::LEPlicElementInterface::saveContext(), oofem::Element::saveContext(), and THROW_CIOERR.

Referenced by giveInputRecordName().

void oofem::TR1_2D_SUPG2::SPRNodalRecoveryMI_giveDofMansDeterminedByPatch	(	IntArray &	answer,
		int	pap
	)

virtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1820 of file tr1_2d_supg2.C.

References oofem::IntArray::at(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), OOFEM_ERROR, and oofem::IntArray::resize().

Referenced by giveElement().

int oofem::TR1_2D_SUPG2::SPRNodalRecoveryMI_giveNumberOfIP ( )

virtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1833 of file tr1_2d_supg2.C.

Referenced by giveElement().

SPRPatchType oofem::TR1_2D_SUPG2::SPRNodalRecoveryMI_givePatchType ( )

virtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1840 of file tr1_2d_supg2.C.

References oofem::SPRPatchType_2dxy.

Referenced by giveElement().

void oofem::TR1_2D_SUPG2::SPRNodalRecoveryMI_giveSPRAssemblyPoints ( IntArray & pap )

virtual

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1811 of file tr1_2d_supg2.C.

References oofem::IntArray::at(), oofem::Element::giveNode(), oofem::FEMComponent::giveNumber(), and oofem::IntArray::resize().

Referenced by giveElement().

double oofem::TR1_2D_SUPG2::truncateMatVolume	(	const Polygon &	matvolpoly,
		double &	volume
	)

virtual

Truncates given material polygon to receiver.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 1519 of file tr1_2d_supg2.C.

References oofem::TR1_2D_SUPG::area, oofem::Graph::clip(), oofem::Polygon::computeVolume(), oofem::Polygon::draw(), formMyVolumePoly(), gc, and OOFEG_DEBUG_LAYER.

Referenced by giveInputRecordName().

virtual void oofem::TR1_2D_SUPG2::updateElementForNewInterfacePosition ( TimeStep * tStep )

inlinevirtual

Reimplemented from oofem::SUPGElement.

Definition at line 115 of file tr1_2d_supg2.h.

References computeCriticalTimeStep(), and updateIntegrationRules().

void oofem::TR1_2D_SUPG2::updateIntegrationRules ( )

protected

Definition at line 1651 of file tr1_2d_supg2.C.

References oofem::_Square, oofem::_Triangle, oofem::Polygon::addVertex(), oofem::TR1_2D_SUPG::area, oofem::TR1_2D_SUPG::c, oofem::Polygon::clear(), computeVolumeAroundID(), gc, oofem::Vertex::getCoords(), oofem::Node::giveCoordinate(), oofem::Polygon::PolygonVertexIterator::giveNext(), oofem::Element::giveNode(), oofem::FEI2dTrLin::global2local(), oofem::Element::integrationRulesArray, oofem::FEInterpolation::local2global(), myPoly, OOFEM_ERROR, oofem::LEPlicElementInterface::p, oofem::Vertex::setCoords(), oofem::LEPlicElementInterface::temp_normal, oofem::LEPlicElementInterface::temp_p, oofem::LEPlicElementInterface::temp_vof, TRSUPG_ZERO_VOF, updateVolumePolygons(), and vcoords.

Referenced by giveDefaultIntegrationRulePtr(), postInitialize(), and updateElementForNewInterfacePosition().

void oofem::TR1_2D_SUPG2::updateStabilizationCoeffs ( TimeStep * tStep )

virtual

Updates the stabilization coefficients used for CBS and SUPG algorithms.

Parameters

tStep Active time step.

Reimplemented from oofem::TR1_2D_SUPG.

Definition at line 915 of file tr1_2d_supg2.C.

References _giveMaterial(), oofem::TR1_2D_SUPG::area, oofem::FloatArray::at(), oofem::FloatMatrix::at(), oofem::TR1_2D_SUPG::b, oofem::FloatArray::beProductOf(), oofem::TR1_2D_SUPG::c, oofem::FloatMatrix::computeFrobeniusNorm(), oofem::FloatArray::computeNorm(), computeNVector(), oofem::FMElement::computeVectorOfVelocities(), computeVolumeAroundID(), oofem::FEMComponent::domain, oofem::Material::give(), oofem::Domain::giveEngngModel(), oofem::TimeStep::givePreviousStep(), oofem::TimeStep::giveTimeIncrement(), oofem::EngngModel::giveVariableScale(), oofem::Element::integrationRulesArray, oofem::max(), oofem::FloatMatrix::resize(), oofem::SUPGElement::t_lsic, oofem::SUPGElement::t_pspg, oofem::SUPGElement::t_supg, oofem::FloatArray::times(), vcoords, oofem::LEPlicElementInterface::vof, oofem::VST_Density, oofem::VST_Length, oofem::VST_Time, oofem::VST_Velocity, oofem::VST_Viscosity, and oofem::FloatMatrix::zero().

Referenced by computeDiffusionTerm_MC().

void oofem::TR1_2D_SUPG2::updateVolumePolygons	(	Polygon &	referenceFluidPoly,
		Polygon &	secondFluidPoly,
		int &	rfPoints,
		int &	sfPoints,
		const FloatArray &	normal,
		const double	p,
		bool	updFlag
	)

protectedvirtual

Definition at line 1411 of file tr1_2d_supg2.C.

References oofem::Polygon::addVertex(), oofem::FloatArray::at(), oofem::Polygon::clear(), oofem::Node::giveCoordinate(), oofem::Element::giveNode(), and oofem::Vertex::setCoords().

Referenced by giveDefaultIntegrationRulePtr(), and updateIntegrationRules().

void oofem::TR1_2D_SUPG2::updateYourself ( TimeStep * tStep )

virtual

Updates element state after equilibrium in time step has been reached.

Default implementation updates all integration rules defined by integrationRulesArray member variable. Doing this, all integration points and their material statuses are updated also. All temporary history variables, which now describe equilibrium state are copied into equilibrium ones. The existing internal state is used for update.

Parameters

tStep Time step for newly reached state.