This class implements associated Material Status to IsotropicDamageMaterial. More...

#include <isodamagemodel.h>

Inheritance diagram for oofem::IsotropicDamageMaterialStatus:

Collaboration diagram for oofem::IsotropicDamageMaterialStatus:

Public Member Functions
	IsotropicDamageMaterialStatus (int n, Domain d, GaussPoint g)
	Constructor. More...

virtual	~IsotropicDamageMaterialStatus ()
	Destructor. More...

virtual void	printOutputAt (FILE file, TimeStep tStep)
	Print receiver's output to given stream. More...

double	giveKappa ()
	Returns the last equilibrated scalar measure of the largest strain level. More...

double	giveTempKappa ()
	Returns the temp. scalar measure of the largest strain level. More...

void	setTempKappa (double newKappa)
	Sets the temp scalar measure of the largest strain level to given value. More...

double	giveDamage ()
	Returns the last equilibrated damage level. More...

double	giveTempDamage ()
	Returns the temp. damage level. More...

void	setTempDamage (double newDamage)
	Sets the temp damage level to given value. More...

double	giveLe ()
	Returns characteristic length stored in receiver. More...

void	setLe (double ls)
	Sets characteristic length to given value. More...

double	giveCrackAngle ()
	Returns crack angle stored in receiver. More...

void	setCrackAngle (double ca)
	Sets crack angle to given value. More...

void	giveCrackVector (FloatArray &answer)
	Returns crack vector stored in receiver. This is useful for plotting cracks as a vector field (paraview etc.). More...

void	setCrackVector (FloatArray cv)
	Sets crack vector to given value. This is useful for plotting cracks as a vector field (paraview etc.). More...

double	giveStressWork ()
	Returns the density of total work of stress on strain increments. More...

double	giveTempStressWork ()
	Returns the temp density of total work of stress on strain increments. More...

void	setTempStressWork (double w)
	Sets the density of total work of stress on strain increments to given value. More...

double	giveDissWork ()
	Returns the density of dissipated work. More...

double	giveTempDissWork ()
	Returns the density of temp dissipated work. More...

void	setTempDissWork (double w)
	Sets the density of dissipated work to given value. More...

void	computeWork (GaussPoint *gp)
	Computes the increment of total stress work and of dissipated work. More...

virtual const char *	giveClassName () const

virtual void	initTempStatus ()
	Initializes the temporary internal variables, describing the current state according to previously reached equilibrium internal variables. More...

virtual void	updateYourself (TimeStep *tStep)
	Update equilibrium history variables according to temp-variables. More...

virtual contextIOResultType	saveContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Stores receiver state to output stream. More...

virtual contextIOResultType	restoreContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Restores the receiver state previously written in stream. More...

Public Member Functions inherited from oofem::StructuralMaterialStatus
	StructuralMaterialStatus (int n, Domain d, GaussPoint g)
	Constructor. Creates new StructuralMaterialStatus with number n, belonging to domain d and IntegrationPoint g. More...

virtual	~StructuralMaterialStatus ()
	Destructor. More...

const FloatArray &	giveStrainVector () const
	Returns the const pointer to receiver's strain vector. More...

const FloatArray &	giveStressVector () const
	Returns the const pointer to receiver's stress vector. More...

const FloatArray &	givePVector () const
	Returns the const pointer to receiver's first Piola-Kirchhoff stress vector. More...

const FloatArray &	giveCVector () const
	Returns the const pointer to receiver's Cauchy stress vector. More...

const FloatArray &	giveFVector () const
	Returns the const pointer to receiver's deformation gradient vector. More...

const FloatArray &	giveTempStrainVector () const
	Returns the const pointer to receiver's temporary strain vector. More...

const FloatArray &	giveTempStressVector () const
	Returns the const pointer to receiver's temporary stress vector. More...

const FloatArray &	giveTempPVector () const
	Returns the const pointer to receiver's temporary first Piola-Kirchhoff stress vector. More...

const FloatArray &	giveTempCVector () const
	Returns the const pointer to receiver's temporary Cauchy stress vector. More...

const FloatArray &	giveTempFVector () const
	Returns the const pointer to receiver's temporary deformation gradient vector. More...

void	letStrainVectorBe (const FloatArray &v)
	Assigns strain vector to given vector v. More...

void	letStressVectorBe (const FloatArray &v)
	Assigns stressVector to given vector v. More...

void	letPVectorBe (const FloatArray &v)
	Assigns PVector to given vector v. More...

void	letCVectorBe (const FloatArray &v)
	Assigns CVector to given vector v. More...

void	letFVectorBe (const FloatArray &v)
	Assigns FVector to given vector v. More...

void	letTempStressVectorBe (const FloatArray &v)
	Assigns tempStressVector to given vector v. More...

void	letTempStrainVectorBe (const FloatArray &v)
	Assigns tempStrainVector to given vector v. More...

void	letTempPVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v. More...

void	letTempCVectorBe (const FloatArray &v)
	Assigns tempPVector to given vector v. More...

void	letTempFVectorBe (const FloatArray &v)
	Assigns tempFVector to given vector v. More...

virtual void	copyStateVariables (const MaterialStatus &iStatus)
	Functions for MaterialStatusMapperInterface. More...

virtual void	addStateVariables (const MaterialStatus &iStatus)

Public Member Functions inherited from oofem::MaterialStatus
	MaterialStatus (int n, Domain d, GaussPoint g)
	Constructor. More...

virtual	~MaterialStatus ()
	Destructor. More...

virtual bool	giveMaterialProperty (int propID, double &value)
	Returns the value of material model property stored in receiving status. More...

virtual void	setMaterialProperty (int propID, double value)
	Allows to set the value of material model property to be stored in receiving status. More...

virtual void	setStatusVariable (int varID, double value)
	Allows to set the value of a specific variable, identified by varID. More...

virtual void	restoreConsistency ()
	Restores consistency of the status, i.e., computes or corrects the values of certain status variables such that the state is admissible. More...

virtual IRResultType	initializeFrom (InputRecord *ir)
	Initializes receiver according to object description stored in input record. More...

Public Member Functions inherited from oofem::IntegrationPointStatus
	IntegrationPointStatus (int n, Domain d, GaussPoint g)
	Constructor. More...

virtual	~IntegrationPointStatus ()
	Destructor. More...

virtual const char *	giveInputRecordName () const

Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
	Regular constructor, creates component with given number and belonging to given domain. More...

virtual	~FEMComponent ()
	Virtual destructor. More...

Domain *	giveDomain () const

virtual void	setDomain (Domain *d)
	Sets associated Domain. More...

int	giveNumber () const

void	setNumber (int num)
	Sets number of receiver. More...

virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
	Local renumbering support. More...

virtual void	giveInputRecord (DynamicInputRecord &input)
	Setups the input record string of receiver. More...

virtual int	checkConsistency ()
	Allows programmer to test some internal data, before computation begins. More...

virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging. More...

virtual Interface *	giveInterface (InterfaceType t)
	Interface requesting service. More...

std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros). More...

Public Member Functions inherited from oofem::MaterialStatusMapperInterface
	MaterialStatusMapperInterface ()

virtual	~MaterialStatusMapperInterface ()

virtual int	MSMI_map (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)
	Maps all internal state variables from the old domain to the given gp status. More...

virtual int	MSMI_map_cz (const GaussPoint &iGP, const Domain &iOldDom, Set &sourceSet, const TimeStep &iTStep, MaterialStatus &oStatus)

virtual int	MSMI_update (const GaussPoint &iGP, const TimeStep &iTStep)
	Updates the internal state variables from previously mapped values. More...

virtual int	MSMI_finish (const TimeStep &iTStep)
	Finishes the mapping for given time step. More...

Protected Attributes
double	kappa
	Scalar measure of the largest strain level ever reached in material. More...

double	tempKappa
	Non-equilibrated scalar measure of the largest strain level. More...

double	damage
	Damage level of material. More...

double	tempDamage
	Non-equilibrated damage level of material. More...

double	le
	Characteristic element length, computed when damage initialized from direction of maximum positive principal strain. More...

double	crack_angle
	Angle characterizing the crack direction. More...

FloatArray	crackVector
	Crack orientation normalized to damage magnitude. This is useful for plotting cracks as a vector field (paraview etc.). More...

double	stressWork
	Density of total work done by stresses on strain increments. More...

double	tempStressWork
	Non-equilibrated density of total work done by stresses on strain increments. More...

double	dissWork
	Density of dissipated work. More...

double	tempDissWork
	Non-equilibrated density of dissipated work. More...

Protected Attributes inherited from oofem::StructuralMaterialStatus
FloatArray	strainVector
	Equilibrated strain vector in reduced form. More...

FloatArray	stressVector
	Equilibrated stress vector in reduced form. More...

FloatArray	tempStressVector
	Temporary stress vector in reduced form (increments are used mainly in nonlinear analysis) More...

FloatArray	tempStrainVector
	Temporary strain vector in reduced form (to find balanced state) More...

FloatArray	PVector
	Equilibrated first Piola-Kirchhoff stress vector. More...

FloatArray	tempPVector
	Temporary first Piola-Kirchhoff stress vector (to find balanced state) More...

FloatArray	CVector
	Equilibrated Cauchy stress vector. More...

FloatArray	tempCVector
	Temporary Cauchy stress vector (to find balanced state) More...

FloatArray	FVector
	Equilibrated deformation gradient in reduced form. More...

FloatArray	tempFVector
	Temporary deformation gradient in reduced form (to find balanced state) More...

Protected Attributes inherited from oofem::IntegrationPointStatus
GaussPoint *	gp
	Associated integration point. More...

Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number. More...

Domain *	domain
	Link to domain object, useful for communicating with other FEM components. More...

Protected Attributes inherited from oofem::MaterialStatusMapperInterface
MaterialMappingAlgorithm *	mpMaterialMapper

Detailed Description

This class implements associated Material Status to IsotropicDamageMaterial.

Stores a scalar damage and hardening variable (and possible extra information).

Definition at line 62 of file isodamagemodel.h.

Constructor & Destructor Documentation

oofem::IsotropicDamageMaterialStatus::IsotropicDamageMaterialStatus	(	int	n,
		Domain *	d,
		GaussPoint *	g
	)

Constructor.

Definition at line 384 of file isodamagemodel.C.

References crack_angle, crackVector, damage, dissWork, kappa, le, oofem::FloatArray::resize(), stressWork, tempDamage, tempDissWork, tempKappa, tempStressWork, and oofem::FloatArray::zero().

Referenced by oofem::IsotropicDamageMaterial::CreateStatus().

oofem::IsotropicDamageMaterialStatus::~IsotropicDamageMaterialStatus ( )

virtual

Destructor.

Definition at line 399 of file isodamagemodel.C.

Member Function Documentation

void oofem::IsotropicDamageMaterialStatus::computeWork ( GaussPoint * gp )

Computes the increment of total stress work and of dissipated work.

Definition at line 526 of file isodamagemodel.C.

References oofem::FloatArray::beDifferenceOf(), oofem::FloatArray::dotProduct(), oofem::StructuralMaterialStatus::strainVector, oofem::StructuralMaterialStatus::stressVector, stressWork, tempDissWork, oofem::StructuralMaterialStatus::tempStrainVector, oofem::StructuralMaterialStatus::tempStressVector, and tempStressWork.

Referenced by oofem::IsotropicDamageMaterial::giveRealStressVector(), and setTempDissWork().

virtual const char* oofem::IsotropicDamageMaterialStatus::giveClassName ( ) const

inlinevirtual

Returns: Class name of the receiver.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::IsotropicDamageMaterial1Status, oofem::IDGMaterialStatus, oofem::IDNLMaterialStatus, oofem::MazarsMaterialStatus, and oofem::MazarsNLMaterialStatus.

Definition at line 147 of file isodamagemodel.h.

References initTempStatus(), restoreContext(), saveContext(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::giveCrackAngle ( )

inline

Returns crack angle stored in receiver.

Definition at line 121 of file isodamagemodel.h.

References crack_angle.

Referenced by oofem::IsotropicDamageMaterial::giveIPValue().

void oofem::IsotropicDamageMaterialStatus::giveCrackVector ( FloatArray & answer )

Returns crack vector stored in receiver. This is useful for plotting cracks as a vector field (paraview etc.).

Definition at line 451 of file isodamagemodel.C.

References crackVector, damage, and oofem::FloatArray::times().

Referenced by oofem::IsotropicDamageMaterial::giveIPValue(), and setCrackAngle().

double oofem::IsotropicDamageMaterialStatus::giveDamage ( )

inline

Returns the last equilibrated damage level.

Definition at line 110 of file isodamagemodel.h.

References damage.

Referenced by oofem::IDGMaterial::give1dGprime(), oofem::IsotropicDamageMaterial::giveIPValue(), oofem::IDNLMaterial::giveLocalNonlocalStiffnessContribution(), oofem::IDNLMaterial::giveNonlocalMetricModifierAt(), oofem::IDGMaterial::givePlaneStrainGprime(), oofem::IsotropicDamageMaterial::givePlaneStressStiffMtrx(), oofem::IsotropicDamageMaterial::giveRealStressVector(), oofem::IDGMaterial::giveRealStressVectorGrad(), oofem::MazarsMaterial::initDamaged(), and oofem::IsotropicDamageMaterial1::initDamaged().

double oofem::IsotropicDamageMaterialStatus::giveDissWork ( )

inline

Returns the density of dissipated work.

Definition at line 137 of file isodamagemodel.h.

References dissWork.

Referenced by oofem::IsotropicDamageMaterial::giveIPValue().

double oofem::IsotropicDamageMaterialStatus::giveKappa ( )

inline

Returns the last equilibrated scalar measure of the largest strain level.

Definition at line 104 of file isodamagemodel.h.

References kappa.

Referenced by oofem::IDGMaterial::give1dKappaMatrix(), oofem::IsotropicDamageMaterial::giveIPValue(), oofem::IsotropicDamageMaterial::giveRealStressVector(), and oofem::IDGMaterial::giveRealStressVectorGrad().

double oofem::IsotropicDamageMaterialStatus::giveLe ( )

inline

Returns characteristic length stored in receiver.

Definition at line 117 of file isodamagemodel.h.

References le.

Referenced by oofem::IsotropicDamageMaterial1::computeDamageParamForCohesiveCrack(), oofem::MazarsMaterial::computeGt(), oofem::IsotropicDamageMaterial1::damageFunctionPrime(), oofem::IsotropicDamageMaterial::giveIPValue(), and oofem::IsotropicDamageMaterial1::initDamaged().

double oofem::IsotropicDamageMaterialStatus::giveStressWork ( )

inline

Returns the density of total work of stress on strain increments.

Definition at line 131 of file isodamagemodel.h.

Referenced by oofem::IsotropicDamageMaterial::giveIPValue(), and setCrackVector().

double oofem::IsotropicDamageMaterialStatus::giveTempDamage ( )

inline

Returns the temp. damage level.

Definition at line 112 of file isodamagemodel.h.

References tempDamage.

Referenced by oofem::IsotropicDamageMaterial1::damageFunctionPrime(), oofem::IDGMaterial::give1dGprime(), oofem::IDGMaterial::give1dStressStiffMtrx(), oofem::IsotropicDamageMaterial::give1dStressStiffMtrx(), oofem::IsotropicDamageMaterial::give3dMaterialStiffnessMatrix(), oofem::IsotropicDamageMaterial::giveIPValue(), oofem::IDNLMaterial::giveNonlocalMetricModifierAt(), oofem::IDGMaterial::givePlaneStrainGprime(), oofem::IDGMaterial::givePlaneStrainStiffMtrx(), oofem::IsotropicDamageMaterial::givePlaneStrainStiffMtrx(), oofem::IDGMaterial::givePlaneStressGprime(), oofem::IDGMaterial::givePlaneStressStiffMtrx(), and oofem::IsotropicDamageMaterial::givePlaneStressStiffMtrx().

double oofem::IsotropicDamageMaterialStatus::giveTempDissWork ( )

inline

Returns the density of temp dissipated work.

Definition at line 139 of file isodamagemodel.h.

References tempDissWork.

double oofem::IsotropicDamageMaterialStatus::giveTempKappa ( )

inline

Returns the temp. scalar measure of the largest strain level.

Definition at line 106 of file isodamagemodel.h.

References tempKappa.

Referenced by oofem::IDGMaterial::give1dKappaMatrix(), oofem::IDNLMaterial::giveLocalNonlocalStiffnessContribution(), oofem::IsotropicDamageMaterial::givePlaneStressStiffMtrx(), and oofem::IDNLMaterial::NonlocalMaterialStiffnessInterface_showSparseMtrxStructure().

double oofem::IsotropicDamageMaterialStatus::giveTempStressWork ( )

inline

Returns the temp density of total work of stress on strain increments.

Definition at line 133 of file isodamagemodel.h.

References tempStressWork.

void oofem::IsotropicDamageMaterialStatus::initTempStatus ( )

virtual

Initializes the temporary internal variables, describing the current state according to previously reached equilibrium internal variables.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::IDGMaterialStatus, oofem::IDNLMaterialStatus, and oofem::MazarsNLMaterialStatus.

Definition at line 425 of file isodamagemodel.C.

References dissWork, oofem::StructuralMaterialStatus::initTempStatus(), kappa, stressWork, tempDissWork, tempKappa, and tempStressWork.

Referenced by giveClassName(), oofem::MazarsNLMaterialStatus::initTempStatus(), oofem::IDNLMaterialStatus::initTempStatus(), and oofem::IDGMaterialStatus::initTempStatus().

void oofem::IsotropicDamageMaterialStatus::printOutputAt	(	FILE *	file,
		TimeStep *	tStep
	)

virtual

Print receiver's output to given stream.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::IDNLMaterialStatus, and oofem::MazarsNLMaterialStatus.

Definition at line 404 of file isodamagemodel.C.

References oofem::FloatArray::at(), crackVector, damage, dissWork, kappa, oofem::StructuralMaterialStatus::printOutputAt(), and stressWork.

contextIOResultType oofem::IsotropicDamageMaterialStatus::restoreContext	(	DataStream &	stream,
		ContextMode	mode,
		void *	obj = `NULL`
	)

virtual

Restores the receiver state previously written in stream.

See also: saveContext

Parameters

stream	Input stream.
mode	Determines amount of info available in stream (state, definition, ...).
obj	Special parameter for sending extra information.

Returns: contextIOResultType.

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::IDGMaterialStatus, oofem::IDNLMaterialStatus, oofem::MazarsMaterialStatus, and oofem::MazarsNLMaterialStatus.

Definition at line 492 of file isodamagemodel.C.

References oofem::CIO_IOERR, oofem::CIO_OK, damage, dissWork, kappa, oofem::DataStream::read(), oofem::StructuralMaterialStatus::restoreContext(), stressWork, and THROW_CIOERR.

Referenced by giveClassName(), oofem::MazarsMaterialStatus::restoreContext(), oofem::IDNLMaterialStatus::restoreContext(), and oofem::IDGMaterialStatus::restoreContext().

contextIOResultType oofem::IsotropicDamageMaterialStatus::saveContext	(	DataStream &	stream,
		ContextMode	mode,
		void *	obj = `NULL`
	)

virtual

Stores receiver state to output stream.

Parameters

stream	Output stream.
mode	Determines amount of info required in stream (state, definition, ...).
obj	Special parameter, used only to send particular integration point to material class version of this method.

Returns: contextIOResultType.

Exceptions

throws an ContextIOERR exception if error encountered.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::IDGMaterialStatus, oofem::IDNLMaterialStatus, oofem::MazarsMaterialStatus, and oofem::MazarsNLMaterialStatus.

Definition at line 459 of file isodamagemodel.C.

References oofem::CIO_IOERR, oofem::CIO_OK, damage, dissWork, kappa, oofem::StructuralMaterialStatus::saveContext(), stressWork, THROW_CIOERR, and oofem::DataStream::write().

Referenced by giveClassName(), oofem::MazarsMaterialStatus::saveContext(), oofem::IDNLMaterialStatus::saveContext(), and oofem::IDGMaterialStatus::saveContext().

void oofem::IsotropicDamageMaterialStatus::setCrackAngle ( double ca )

inline

Sets crack angle to given value.

Definition at line 123 of file isodamagemodel.h.

References giveCrackVector().

Referenced by oofem::IsotropicDamageMaterial1::initDamaged().

void oofem::IsotropicDamageMaterialStatus::setCrackVector ( FloatArray cv )

inline

Sets crack vector to given value. This is useful for plotting cracks as a vector field (paraview etc.).

Definition at line 127 of file isodamagemodel.h.

References giveStressWork(), and stressWork.

Referenced by oofem::IsotropicDamageMaterial1::initDamaged().

void oofem::IsotropicDamageMaterialStatus::setLe ( double ls )

inline

Sets characteristic length to given value.

Definition at line 119 of file isodamagemodel.h.

Referenced by oofem::MazarsMaterial::initDamaged(), oofem::MazarsNLMaterial::initDamaged(), and oofem::IsotropicDamageMaterial1::initDamaged().

void oofem::IsotropicDamageMaterialStatus::setTempDamage ( double newDamage )

inline

Sets the temp damage level to given value.

Definition at line 114 of file isodamagemodel.h.

Referenced by oofem::IsotropicDamageMaterial::giveRealStressVector(), oofem::IDGMaterial::giveRealStressVectorGrad(), and oofem::IsotropicDamageMaterial1::MMI_map().

void oofem::IsotropicDamageMaterialStatus::setTempDissWork ( double w )

inline

Sets the density of dissipated work to given value.

Definition at line 141 of file isodamagemodel.h.

References computeWork(), and oofem::IntegrationPointStatus::gp.

void oofem::IsotropicDamageMaterialStatus::setTempKappa ( double newKappa )

inline

Sets the temp scalar measure of the largest strain level to given value.

Definition at line 108 of file isodamagemodel.h.

Referenced by oofem::IsotropicDamageMaterial::giveRealStressVector(), oofem::IDGMaterial::giveRealStressVectorGrad(), and oofem::IsotropicDamageMaterial1::MMI_map().

void oofem::IsotropicDamageMaterialStatus::setTempStressWork ( double w )

inline

Sets the density of total work of stress on strain increments to given value.

Definition at line 135 of file isodamagemodel.h.

void oofem::IsotropicDamageMaterialStatus::updateYourself ( TimeStep * )

virtual

Update equilibrium history variables according to temp-variables.

Invoked, after new equilibrium state has been reached.

Reimplemented from oofem::StructuralMaterialStatus.

Reimplemented in oofem::IDGMaterialStatus, oofem::IDNLMaterialStatus, and oofem::MazarsNLMaterialStatus.

Definition at line 439 of file isodamagemodel.C.

References damage, dissWork, kappa, stressWork, tempDamage, tempDissWork, tempKappa, tempStressWork, and oofem::StructuralMaterialStatus::updateYourself().

Referenced by giveClassName(), oofem::IsotropicDamageMaterial1::MMI_map(), oofem::MazarsNLMaterialStatus::updateYourself(), oofem::IDNLMaterialStatus::updateYourself(), and oofem::IDGMaterialStatus::updateYourself().

Member Data Documentation

double oofem::IsotropicDamageMaterialStatus::crack_angle

protected

Angle characterizing the crack direction.

Definition at line 80 of file isodamagemodel.h.

Referenced by giveCrackAngle(), and IsotropicDamageMaterialStatus().

FloatArray oofem::IsotropicDamageMaterialStatus::crackVector

protected

Crack orientation normalized to damage magnitude. This is useful for plotting cracks as a vector field (paraview etc.).

Definition at line 82 of file isodamagemodel.h.

Referenced by giveCrackVector(), IsotropicDamageMaterialStatus(), and printOutputAt().

double oofem::IsotropicDamageMaterialStatus::damage

protected

Damage level of material.

Definition at line 70 of file isodamagemodel.h.

Referenced by giveCrackVector(), giveDamage(), IsotropicDamageMaterialStatus(), oofem::MazarsNLMaterialStatus::printOutputAt(), oofem::IDNLMaterialStatus::printOutputAt(), printOutputAt(), restoreContext(), saveContext(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::dissWork

protected

Density of dissipated work.

Definition at line 90 of file isodamagemodel.h.

Referenced by giveDissWork(), initTempStatus(), IsotropicDamageMaterialStatus(), oofem::IDNLMaterialStatus::printOutputAt(), printOutputAt(), restoreContext(), saveContext(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::kappa

protected

Scalar measure of the largest strain level ever reached in material.

Definition at line 66 of file isodamagemodel.h.

Referenced by oofem::IsotropicDamageMaterial::evaluatePermanentStrain(), oofem::MazarsNLMaterial::giveClassName(), oofem::MazarsMaterial::giveClassName(), oofem::IDNLMaterial::giveInputRecordName(), giveKappa(), initTempStatus(), oofem::IsotropicDamageMaterial1::isCrackBandApproachUsed(), IsotropicDamageMaterialStatus(), oofem::MazarsNLMaterialStatus::printOutputAt(), oofem::IDNLMaterialStatus::printOutputAt(), printOutputAt(), restoreContext(), saveContext(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::le

protected

Characteristic element length, computed when damage initialized from direction of maximum positive principal strain.

Fixed during further loading.

Definition at line 78 of file isodamagemodel.h.

Referenced by giveLe(), IsotropicDamageMaterialStatus(), oofem::IDGMaterialStatus::restoreContext(), and oofem::IDGMaterialStatus::saveContext().

double oofem::IsotropicDamageMaterialStatus::stressWork

protected

Density of total work done by stresses on strain increments.

Definition at line 86 of file isodamagemodel.h.

Referenced by computeWork(), initTempStatus(), IsotropicDamageMaterialStatus(), oofem::IDNLMaterialStatus::printOutputAt(), printOutputAt(), restoreContext(), saveContext(), setCrackVector(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::tempDamage

protected

Non-equilibrated damage level of material.

Definition at line 72 of file isodamagemodel.h.

Referenced by giveTempDamage(), IsotropicDamageMaterialStatus(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::tempDissWork

protected

Non-equilibrated density of dissipated work.

Definition at line 92 of file isodamagemodel.h.

Referenced by computeWork(), giveTempDissWork(), initTempStatus(), IsotropicDamageMaterialStatus(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::tempKappa

protected

Non-equilibrated scalar measure of the largest strain level.

Definition at line 68 of file isodamagemodel.h.

Referenced by giveTempKappa(), initTempStatus(), IsotropicDamageMaterialStatus(), and updateYourself().

double oofem::IsotropicDamageMaterialStatus::tempStressWork

protected

Non-equilibrated density of total work done by stresses on strain increments.

Definition at line 88 of file isodamagemodel.h.

Referenced by computeWork(), giveTempStressWork(), initTempStatus(), IsotropicDamageMaterialStatus(), and updateYourself().

The documentation for this class was generated from the following files:

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation