oofem-wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

==== LCPC Box test ====
=== Test setup and Geometry ===

This simulation illustrates the capability of simulation code to solve 3D problems. It is the box with rectangular specimen of SCC in it (see the picture). The Box is 0.7 x 0.2 x 0.15 m large, concrete specimen 0.27 x 0.2 x 0.12 m.

=== Computational Model ===
The model consists of 10052 nodes and 50880 tetrahedral elements with linear approximation of velocity
and pressure fields, solved in 20 time steps. Concrete is modeled as a Bingham fluid with different values of parameters. In the videos below, comparison of the flow with different value of friction and yield stress is shown. In the first video, concrete has yield stress equal to 40 Pa and plastic viscosity 40 Pa.s while friction parameter is equal to 10.0 and 80.0. In the second video, friction parameter is in both cases equal to 20.0 and plastic viscosity to 40 Pa.s, while yield stress is 40 Pa and 400Pa.

=== Results ===
{{:tailorcrete:examples:channel_friction_beta10x80_tau40_mu40.avi|}}

{{:tailorcrete:examples:channel_friction_beta20_tau40x400_mu40.avi|}}

Example of input for LCPC Box can be found here: {{:tailorcrete:examples:channel_beta20_tau40_mu40_oofem.in|}}

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International