Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 3.137.174.183
Lock expires at: 2025/04/04 11:59 (15 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Steel plasticity with buckling ===== 

This example demonstrates computation of structural detail, where a girder beam crosses a column. A welded pair of U profiles 300 mm creates both cross-sections of the beam and the column. Geometry and mesh were created in [[http://www.salome-platform.org|Salome]] and converted to OOFEM input file via [[unv2oofem:unv2oofem|Unv2oofem convertor]].

This task contains 10 383 nodes and 30 786 linear tetrahedral elements. Perfectly plastic material is assigned to steel with the yield strength of 200 MPa. Arc-length method with IML solver were employed. The maximum axial force 1.58 MN on the column leads to collapse in plastic/buckling mode. Updated Lagrangian formulation ensured updating nodal position after each time increment thus facilitating second-order theory and equilibrium on deformed shapes assuming small strains. 




//Created 01/2011 by Vít Šmilauer. Acknowledgements belong to B. Patzák, Z. Bittnar, and T. Roubal.//