Differences

This shows you the differences between two versions of the page.

--- gallery:steelplasticity [2010/12/28 11:05] – smilauer
+++ gallery:steelplasticity [2010/12/29 23:59] (current) – smilauer
@@ Line 1: / Line 1: @@
 ===== Steel plasticity with buckling =====
-This example demonstrates computation of structural detail, where a girder beam crosses a column. A welded pair of U profiles 300 mm creates both cross-sections of the beam and the column. Geometry and mesh were created in [[http://www.salome-platform.org|Salome]] and converted to OOFEM input file via [[unv2oofem:unv2oofem|Unv2oofem convertor]].
+This example demonstrates computation of a structural detail, where a girder beam crosses a column. A welded pair of U profiles 300 mm creates both cross-sections of the beam and the column. The geometry and the mesh were created in [[http://www.salome-platform.org|Salome]] and converted to OOFEM input file via [[unv2oofem:unv2oofem|Unv2oofem convertor]].
-{{:gallery:steel_plasticity.zip|A downloadable zip file}} contains Salome's hdf file, unv file, OOFEM input file and control file. Although symmetry could have been used and the problem reduced 8//x//, the full-scale simulation is carried out to demonstrate symmetric response.
+{{:gallery:steel_plasticity.zip|A downloadable zip file}} contains Salome's hdf file, unv file, OOFEM input file and the control file. Although symmetry could have been used and the problem reduced 8//x//, the full-scale simulation is carried out to demonstrate symmetric response.
 {{:gallery:ldnprcice_01_kriz.png?350|}}