This abstract class represent a general base element class for fluid dynamic problems solved using CBS algorithm. More...

#include <cbselement.h>

Inheritance diagram for oofem::CBSElement:

Collaboration diagram for oofem::CBSElement:

Public Member Functions
	CBSElement (int n, Domain *aDomain)

virtual	~CBSElement ()

virtual IRResultType	initializeFrom (InputRecord *ir)
	Initializes receiver according to object description stored in input record. More...

virtual void	giveInputRecord (DynamicInputRecord &input)
	Setups the input record string of receiver. More...

virtual void	giveCharacteristicMatrix (FloatMatrix &answer, CharType type, TimeStep *tStep)
	Computes characteristic matrix of receiver of requested type in given time step. More...

virtual void	giveCharacteristicVector (FloatArray &answer, CharType type, ValueModeType mode, TimeStep *tStep)
	Computes characteristic vector of receiver of requested type in given time step. More...

virtual void	computeConsistentMassMtrx (FloatMatrix &answer, TimeStep *tStep)=0
	Calculates consistent mass matrix. More...

virtual void	computeDiagonalMassMtrx (FloatArray &answer, TimeStep *tStep)=0
	Calculates diagonal mass matrix. More...

virtual void	computePrescribedTermsI (FloatArray &answer, TimeStep *tStep)
	Calculates rhs due to prescribed () velocities for () velocities. More...

virtual void	computeConvectionTermsI (FloatArray &answer, TimeStep *tStep)=0
	Calculates convection component for (*) velocities. More...

virtual void	computeDiffusionTermsI (FloatArray &answer, TimeStep *tStep)=0
	Calculates contribution from diffusion terms for (*) velocities. More...

virtual void	computeDensityRhsVelocityTerms (FloatArray &answer, TimeStep *tStep)=0
	Computes velocity terms on RHS for density equation. More...

virtual void	computeDensityRhsPressureTerms (FloatArray &answer, TimeStep *tStep)=0
	Computes pressure terms on RHS for density equation. More...

virtual void	computePrescribedTractionPressure (FloatArray &answer, TimeStep *tStep)=0
	Computes prescribed pressure due to applied tractions. More...

virtual void	computeNumberOfNodalPrescribedTractionPressureContributions (FloatArray &answer, TimeStep *tStep)=0
	Computes number of edges/sides with prescribed traction contributing to node with prescribed pressure. More...

virtual void	computePressureLhs (FloatMatrix &answer, TimeStep *tStep)=0
	Calculates the pressure LHS. More...

virtual void	computeCorrectionRhs (FloatArray &answer, TimeStep *tStep)=0
	Calculates the RHS of velocity correction step. More...

virtual double	computeCriticalTimeStep (TimeStep *tStep)=0
	Calculates critical time step. More...

virtual void	updateInternalState (TimeStep *tStep)
	Updates element state after equilibrium in time step has been reached. More...

virtual int	checkConsistency ()
	Performs consistency check. More...

int	giveInternalStateAtNode (FloatArray &answer, InternalStateType type, InternalStateMode mode, int node, TimeStep *tStep)
	Returns internal state variable (like stress,strain) at node of element in Reduced form, the way how is obtained is dependent on InternalValueType. More...

Public Member Functions inherited from oofem::FMElement
	FMElement (int n, Domain *aDomain)

virtual	~FMElement ()

virtual void	updateStabilizationCoeffs (TimeStep *tStep)
	Updates the stabilization coefficients used for CBS and SUPG algorithms. More...

virtual void	computeVectorOfVelocities (ValueModeType mode, TimeStep *tStep, FloatArray &velocities)

virtual void	computeVectorOfPressures (ValueModeType mode, TimeStep *tStep, FloatArray &pressures)

Public Member Functions inherited from oofem::Element
	Element (int n, Domain *aDomain)
	Constructor. More...

	Element (const Element &src)=delete

Element &	operator= (const Element &src)=delete

virtual	~Element ()
	Virtual destructor. More...

virtual void	drawYourself (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawAnnotation (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawRawGeometry (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawDeformedGeometry (oofegGraphicContext &gc, TimeStep *tStep, UnknownType)

virtual void	drawScalar (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	drawSpecial (oofegGraphicContext &gc, TimeStep *tStep)

virtual void	giveLocalIntVarMaxMin (oofegGraphicContext &gc, TimeStep *tStep, double &emin, double &emax)

virtual int	giveInternalStateAtSide (FloatArray &answer, InternalStateType type, InternalStateMode mode, int side, TimeStep *tStep)
	Returns internal state variable (like stress,strain) at side of element in Reduced form If side is possessing DOFs, otherwise recover techniques will not work due to absence of side-shape functions. More...

virtual void	showSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows sparse structure. More...

virtual void	showExtendedSparseMtrxStructure (CharType mtrx, oofegGraphicContext &gc, TimeStep *tStep)
	Shows extended sparse structure (for example, due to nonlocal interactions for tangent stiffness) More...

int	giveLabel () const

int	giveGlobalNumber () const

void	setGlobalNumber (int num)
	Sets receiver globally unique number. More...

elementParallelMode	giveParallelMode () const
	Return elementParallelMode of receiver. More...

void	setParallelMode (elementParallelMode _mode)
	Sets parallel mode of element. More...

virtual elementParallelMode	giveKnotSpanParallelMode (int) const
	Returns the parallel mode for particular knot span of the receiver. More...

int	packUnknowns (DataStream &buff, TimeStep *tStep)
	Pack all necessary data of element (according to its parallel_mode) integration points into given communication buffer. More...

int	unpackAndUpdateUnknowns (DataStream &buff, TimeStep *tStep)
	Unpack and updates all necessary data of element (according to its parallel_mode) integration points into given communication buffer. More...

int	estimatePackSize (DataStream &buff)
	Estimates the necessary pack size to hold all packed data of receiver. More...

const IntArray *	givePartitionList () const
	Returns partition list of receiver. More...

void	setPartitionList (IntArray &pl)
	Sets partition list of receiver. More...

virtual double	predictRelativeComputationalCost ()
	Returns the weight representing relative computational cost of receiver The reference element is triangular plane stress element with linear approximation, single integration point and linear isotropic material. More...

virtual double	giveRelativeSelfComputationalCost ()
	Returns the weight representing relative computational cost of receiver The reference element is triangular plane stress element. More...

virtual double	predictRelativeRedistributionCost ()
	Returns the relative redistribution cost of the receiver. More...

IntArray *	giveBodyLoadArray ()
	Returns array containing load numbers of loads acting on element. More...

IntArray *	giveBoundaryLoadArray ()
	Returns array containing load numbers of boundary loads acting on element. More...

virtual contextIOResultType	saveContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Stores receiver state to output stream. More...

virtual contextIOResultType	restoreContext (DataStream &stream, ContextMode mode, void *obj=NULL)
	Restores the receiver state previously written in stream. More...

virtual void	printOutputAt (FILE file, TimeStep tStep)
	Prints output of receiver to stream, for given time step. More...

virtual const char *	giveClassName () const

void	giveLocationArray (IntArray &locationArray, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const
	Returns the location array (array of code numbers) of receiver for given numbering scheme. More...

void	giveLocationArray (IntArray &locationArray, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL) const

virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)
	Returns the location array for the boundary of the element. More...

virtual void	giveBoundaryLocationArray (IntArray &locationArray, const IntArray &bNodes, const IntArray &dofIDMask, const UnknownNumberingScheme &s, IntArray *dofIds=NULL)

virtual int	giveNumberOfDofs ()

virtual int	giveNumberOfInternalDofManagers () const

virtual DofManager *	giveInternalDofManager (int i) const
	Returns i-th internal element dof manager of the receiver. More...

virtual double	giveCharacteristicValue (CharType type, TimeStep *tStep)
	Computes characteristic value of receiver of requested type in given time step. More...

virtual void	computeLoadVector (FloatArray &answer, BodyLoad load, CharType type, ValueModeType mode, TimeStep tStep)
	Computes the contribution of the given body load (volumetric). More...

virtual void	computeBoundarySurfaceLoadVector (FloatArray &answer, BoundaryLoad load, int boundary, CharType type, ValueModeType mode, TimeStep tStep, bool global=true)
	Computes the contribution of the given load at the given boundary surface in global coordinate system. More...

virtual void	computeTangentFromSurfaceLoad (FloatMatrix &answer, SurfaceLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
	Computes the tangent contribution of the given load at the given boundary. More...

virtual void	computeTangentFromEdgeLoad (FloatMatrix &answer, EdgeLoad load, int boundary, MatResponseMode rmode, TimeStep tStep)
	Computes the tangent contribution of the given load at the given boundary. More...

virtual void	computeBoundaryEdgeLoadVector (FloatArray &answer, BoundaryLoad load, int edge, CharType type, ValueModeType mode, TimeStep tStep, bool global=true)
	Computes the contribution of the given load at the given boundary edge. More...

const IntArray &	giveBodyLoadList () const
	Returns receiver list of bodyloads. More...

const IntArray &	giveBoundaryLoadList () const
	Returns receiver list of boundary loads. More...

void	computeVectorOf (ValueModeType u, TimeStep *tStep, FloatArray &answer)
	Returns local vector of unknowns. More...

void	computeVectorOf (const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)

void	computeBoundaryVectorOf (const IntArray &bNodes, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
	Boundary version of computeVectorOf. More...

void	computeVectorOf (PrimaryField &field, const IntArray &dofIDMask, ValueModeType u, TimeStep *tStep, FloatArray &answer, bool padding=false)
	Returns local vector of unknowns. More...

void	computeVectorOfPrescribed (ValueModeType u, TimeStep *tStep, FloatArray &answer)
	Returns local vector of prescribed unknowns. More...

void	computeVectorOfPrescribed (const IntArray &dofIDMask, ValueModeType type, TimeStep *tStep, FloatArray &answer)
	Returns local vector of prescribed unknowns. More...

virtual int	computeNumberOfDofs ()
	Computes or simply returns total number of element's local DOFs. More...

virtual int	computeNumberOfGlobalDofs ()
	Computes the total number of element's global dofs. More...

int	computeNumberOfPrimaryMasterDofs ()
	Computes the total number of element's primary master DOFs. More...

virtual bool	computeGtoLRotationMatrix (FloatMatrix &answer)
	Returns transformation matrix from global c.s. More...

virtual bool	giveRotationMatrix (FloatMatrix &answer)
	Transformation matrices updates rotation matrix between element-local and primary DOFs, taking into account nodal c.s. More...

virtual bool	computeDofTransformationMatrix (FloatMatrix &answer, const IntArray &nodes, bool includeInternal)
	Returns transformation matrix for DOFs from global coordinate system to local coordinate system in nodes. More...

virtual void	giveDofManDofIDMask (int inode, IntArray &answer) const
	Returns dofmanager dof mask for node. More...

virtual void	giveInternalDofManDofIDMask (int inode, IntArray &answer) const
	Returns internal dofmanager dof mask for node. More...

virtual void	giveElementDofIDMask (IntArray &answer) const
	Returns element dof mask for node. More...

virtual void	computeField (ValueModeType mode, TimeStep *tStep, const FloatArray &lcoords, FloatArray &answer)
	Computes the unknown vector interpolated at the specified local coordinates. More...

virtual double	computeVolumeAround (GaussPoint *gp)
	Returns volume related to given integration point. More...

virtual double	computeVolumeAreaOrLength ()
	Computes the volume, area or length of the element depending on its spatial dimension. More...

double	computeMeanSize ()
	Computes the size of the element defined as its length. More...

virtual double	computeVolume ()
	Computes the volume. More...

virtual double	computeArea ()
	Computes the area (zero for all but 2d geometries). More...

virtual double	computeLength ()
	Computes the length (zero for all but 1D geometries) More...

virtual void	giveBoundaryEdgeNodes (IntArray &bNodes, int boundary)
	Returns list of receiver boundary nodes for given edge. More...

virtual void	giveBoundarySurfaceNodes (IntArray &bNodes, int boundary)
	Returns list of receiver boundary nodes for given surface. More...

virtual IntegrationRule *	giveBoundaryEdgeIntegrationRule (int order, int boundary)
	Returns boundary edge integration rule. More...

virtual IntegrationRule *	giveBoundarySurfaceIntegrationRule (int order, int boundary)
	Returns boundary surface integration rule. More...

int	giveDofManagerNumber (int i) const
	Translates local to global indices for dof managers. More...

const IntArray &	giveDofManArray () const

void	addDofManager (DofManager *dMan)

DofManager *	giveDofManager (int i) const

Node *	giveNode (int i) const
	Returns reference to the i-th node of element. More...

virtual ElementSide *	giveSide (int i) const
	Returns reference to the i-th side of element. More...

virtual FEInterpolation *	giveInterpolation () const

virtual FEInterpolation *	giveInterpolation (DofIDItem id) const
	Returns the interpolation for the specific dof id. More...

virtual Material *	giveMaterial ()

int	giveMaterialNumber () const

CrossSection *	giveCrossSection ()

void	setMaterial (int matIndx)
	Sets the material of receiver. More...

virtual void	setCrossSection (int csIndx)
	Sets the cross section model of receiver. More...

virtual int	giveNumberOfDofManagers () const

virtual int	giveNumberOfNodes () const
	Returns number of nodes of receiver. More...

void	setDofManagers (const IntArray &dmans)
	Sets receiver dofManagers. More...

void	setBodyLoads (const IntArray &bodyLoads)
	Sets receiver bodyLoadArray. More...

void	setIntegrationRules (std::vector< std::unique_ptr< IntegrationRule > > irlist)
	Sets integration rules. More...

virtual integrationDomain	giveIntegrationDomain () const
	Returns integration domain for receiver, used to initialize integration point over receiver volume. More...

virtual MaterialMode	giveMaterialMode ()
	Returns material mode for receiver integration points. More...

virtual int	giveIntegrationRuleLocalCodeNumbers (IntArray &answer, IntegrationRule &ie)
	Assembles the code numbers of given integration element (sub-patch) This is done by obtaining list of nonzero shape functions and by collecting the code numbers of nodes corresponding to these shape functions. More...

int	giveRegionNumber ()

virtual void	postInitialize ()
	Performs post initialization steps. More...

virtual void	updateYourself (TimeStep *tStep)
	Updates element state after equilibrium in time step has been reached. More...

virtual void	initializeYourself (TimeStep *timeStepWhenICApply)
	Initialization according to state given by initial conditions. More...

virtual bool	isActivated (TimeStep *tStep)

virtual bool	isCast (TimeStep *tStep)

virtual void	initForNewStep ()
	Initializes receivers state to new time step. More...

virtual Element_Geometry_Type	giveGeometryType () const
	Returns the element geometry type. More...

virtual int	giveSpatialDimension ()
	Returns the element spatial dimension (1, 2, or 3). More...

virtual int	giveNumberOfBoundarySides ()

virtual int	giveDefaultIntegrationRule () const
	Returns id of default integration rule. More...

virtual IntegrationRule *	giveDefaultIntegrationRulePtr ()
	Access method for default integration rule. More...

int	giveNumberOfIntegrationRules ()

virtual IntegrationRule *	giveIntegrationRule (int i)

std::vector< std::unique_ptr< IntegrationRule > > &	giveIntegrationRulesArray ()

virtual int	testElementExtension (ElementExtension ext)
	Tests if the element implements required extension. More...

virtual int	giveIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)
	Returns the integration point corresponding value in full form. More...

int	giveGlobalIPValue (FloatArray &answer, GaussPoint gp, InternalStateType type, TimeStep tStep)

virtual double	giveLengthInDir (const FloatArray &normalToCrackPlane)
	Default implementation returns length of element projection into specified direction. More...

virtual double	giveCharacteristicLength (const FloatArray &normalToCrackPlane)
	Returns the size of element in the given direction, in some cases adjusted (e.g. More...

double	giveCharacteristicLengthForPlaneElements (const FloatArray &normalToCrackPlane)
	Returns the size of element in the given direction if the direction is in the XY plane, otherwise gives the mean size defined as the square root of the element area. More...

double	giveCharacteristicLengthForAxisymmElements (const FloatArray &normalToCrackPlane)
	Returns the size of an axisymmetric element in the given direction if the direction is in the XY plane, otherwise gives the mean distance vrom the symmetry axis multiplied by pi. More...

virtual double	giveCharacteristicSize (GaussPoint *gp, FloatArray &normalToCrackPlane, ElementCharSizeMethod method)
	Returns characteristic element size for a given integration point and given direction. More...

virtual double	giveParentElSize () const
	Returns the size (length, area or volume depending on element type) of the parent element. More...

virtual void	updateBeforeNonlocalAverage (TimeStep *tStep)
	Updates internal element state (in all integration points of receiver) before nonlocal averaging takes place. More...

virtual int	computeGlobalCoordinates (FloatArray &answer, const FloatArray &lcoords)
	Computes the global coordinates from given element's local coordinates. More...

virtual bool	computeLocalCoordinates (FloatArray &answer, const FloatArray &gcoords)
	Computes the element local coordinates from given global coordinates. More...

virtual int	giveLocalCoordinateSystem (FloatMatrix &answer)
	Returns local coordinate system of receiver Required by material models with ortho- and anisotrophy. More...

virtual void	computeMidPlaneNormal (FloatArray &answer, const GaussPoint *gp)
	Computes mid-plane normal of receiver at integration point. More...

virtual int	adaptiveMap (Domain oldd, TimeStep tStep)
	Initializes the internal state variables stored in all IPs according to state in given domain. More...

virtual int	mapStateVariables (Domain &iOldDom, const TimeStep &iTStep)
	Maps the internal state variables stored in all IPs from the old domain to the new domain. More...

virtual int	adaptiveUpdate (TimeStep *tStep)
	Updates the internal state variables stored in all IPs according to already mapped state. More...

virtual int	adaptiveFinish (TimeStep *tStep)
	Finishes the mapping for given time step. More...

virtual void	updateLocalNumbering (EntityRenumberingFunctor &f)
	Local renumbering support. More...

template<class T >
void	ipEvaluator (T src, void(T::f)(GaussPoint *gp))
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f. More...

template<class T , class S >
void	ipEvaluator (T src, void(T::f)(GaussPoint *, S &), S &_val)
	Integration point evaluator, loops over receiver IP's and calls given function (passed as f parameter) on them. The IP is parameter to function f as well as additional array. More...

Public Member Functions inherited from oofem::FEMComponent
	FEMComponent (int n, Domain *d)
	Regular constructor, creates component with given number and belonging to given domain. More...

virtual	~FEMComponent ()
	Virtual destructor. More...

virtual const char *	giveInputRecordName () const =0

Domain *	giveDomain () const

virtual void	setDomain (Domain *d)
	Sets associated Domain. More...

int	giveNumber () const

void	setNumber (int num)
	Sets number of receiver. More...

virtual void	printYourself ()
	Prints receiver state on stdout. Useful for debugging. More...

virtual Interface *	giveInterface (InterfaceType t)
	Interface requesting service. More...

std::string	errorInfo (const char *func) const
	Returns string for prepending output (used by error reporting macros). More...

Protected Member Functions
virtual void	computeDeviatoricStress (FloatArray &answer, GaussPoint gp, TimeStep tStep)=0
	Computes deviatoric stress vector in given integration point and solution step from given total strain vector. More...

Protected Member Functions inherited from oofem::Element
virtual void	computeGaussPoints ()
	Initializes the array of integration rules member variable. More...

Protected Attributes
IntArray	boundarySides
	Array of boundary sides. More...

IntArray	boundaryCodes
	Boundary sides codes. More...

Protected Attributes inherited from oofem::Element
int	numberOfDofMans
	Number of dofmanagers. More...

IntArray	dofManArray
	Array containing dofmanager numbers. More...

int	material
	Number of associated material. More...

int	crossSection
	Number of associated cross section. More...

IntArray	bodyLoadArray
	Array containing indexes of loads (body loads and boundary loads are kept separately), that apply on receiver. More...

IntArray	boundaryLoadArray

std::vector< std::unique_ptr< IntegrationRule > >	integrationRulesArray
	List of integration rules of receiver (each integration rule contains associated integration points also). More...

FloatMatrix	elemLocalCS
	Transformation material matrix, used in orthotropic and anisotropic materials, global->local transformation. More...

int	activityTimeFunction
	Element activity time function. If defined, nonzero value indicates active receiver, zero value inactive element. More...

int	globalNumber
	In parallel mode, globalNumber contains globally unique DoFManager number. More...

int	numberOfGaussPoints
	Number of integration points as specified by nip. More...

elementParallelMode	parallel_mode
	Determines the parallel mode of the element. More...

IntArray	partitions
	List of partition sharing the shared element or remote partition containing remote element counterpart. More...

Protected Attributes inherited from oofem::FEMComponent
int	number
	Component number. More...

Domain *	domain
	Link to domain object, useful for communicating with other FEM components. More...

Detailed Description

This abstract class represent a general base element class for fluid dynamic problems solved using CBS algorithm.

Definition at line 56 of file cbselement.h.

Constructor & Destructor Documentation

oofem::CBSElement::CBSElement	(	int	n,
		Domain *	aDomain
	)

Definition at line 49 of file cbselement.C.

oofem::CBSElement::~CBSElement ( )

virtual

Definition at line 54 of file cbselement.C.

Member Function Documentation

int oofem::CBSElement::checkConsistency ( )

virtual

Performs consistency check.

This method is called at startup for all elements in particular domain. This method is intended to check data compatibility. Particular element types should test if compatible material and crossSection both with required capabilities are specified. Derived classes should provide their own analysis specific tests. Some printed input if incompatibility is found should be provided (error or warning member functions). Method can be also used to initialize some variables, since this is invoked after all domain components are instanciated.

Returns: Zero value if check fail, otherwise nonzero.

Reimplemented from oofem::Element.

Reimplemented in oofem::TR1_2D_CBS.

Definition at line 140 of file cbselement.C.

Referenced by oofem::TR1_2D_CBS::checkConsistency().

virtual void oofem::CBSElement::computeConsistentMassMtrx	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

pure virtual

Calculates consistent mass matrix.

Implemented in oofem::TR1_2D_CBS.

Referenced by computePrescribedTermsI(), and giveCharacteristicMatrix().

virtual void oofem::CBSElement::computeConvectionTermsI	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Calculates convection component for (*) velocities.

Implemented in oofem::TR1_2D_CBS.

virtual void oofem::CBSElement::computeCorrectionRhs	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Calculates the RHS of velocity correction step.

Implemented in oofem::TR1_2D_CBS.

virtual double oofem::CBSElement::computeCriticalTimeStep ( TimeStep * tStep )

pure virtual

Calculates critical time step.

Implemented in oofem::TR1_2D_CBS.

virtual void oofem::CBSElement::computeDensityRhsPressureTerms	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Computes pressure terms on RHS for density equation.

Implemented in oofem::TR1_2D_CBS.

virtual void oofem::CBSElement::computeDensityRhsVelocityTerms	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Computes velocity terms on RHS for density equation.

Implemented in oofem::TR1_2D_CBS.

virtual void oofem::CBSElement::computeDeviatoricStress	(	FloatArray &	answer,
		GaussPoint *	gp,
		TimeStep *	tStep
	)

protectedpure virtual

Computes deviatoric stress vector in given integration point and solution step from given total strain vector.

Implemented in oofem::TR1_2D_CBS.

Referenced by updateInternalState().

virtual void oofem::CBSElement::computeDiagonalMassMtrx	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Calculates diagonal mass matrix.

Implemented in oofem::TR1_2D_CBS.

Referenced by giveCharacteristicVector().

virtual void oofem::CBSElement::computeDiffusionTermsI	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Calculates contribution from diffusion terms for (*) velocities.

Implemented in oofem::TR1_2D_CBS.

virtual void oofem::CBSElement::computeNumberOfNodalPrescribedTractionPressureContributions	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Computes number of edges/sides with prescribed traction contributing to node with prescribed pressure.

Implemented in oofem::TR1_2D_CBS.

void oofem::CBSElement::computePrescribedTermsI	(	FloatArray &	answer,
		TimeStep *	tStep
	)

virtual

Calculates rhs due to prescribed (*) velocities for (*) velocities.

Definition at line 116 of file cbselement.C.

References oofem::FloatArray::beProductOf(), computeConsistentMassMtrx(), computePressureLhs(), oofem::FMElement::computeVectorOfPressures(), oofem::FMElement::computeVectorOfVelocities(), and oofem::FloatArray::negated().

virtual void oofem::CBSElement::computePrescribedTractionPressure	(	FloatArray &	answer,
		TimeStep *	tStep
	)

pure virtual

Computes prescribed pressure due to applied tractions.

Implemented in oofem::TR1_2D_CBS.

virtual void oofem::CBSElement::computePressureLhs	(	FloatMatrix &	answer,
		TimeStep *	tStep
	)

pure virtual

Calculates the pressure LHS.

Implemented in oofem::TR1_2D_CBS.

Referenced by computePrescribedTermsI().

void oofem::CBSElement::giveCharacteristicMatrix	(	FloatMatrix &	answer,
		CharType	type,
		TimeStep *	tStep
	)

virtual

Computes characteristic matrix of receiver of requested type in given time step.

Parameters

answer	Requested characteristic matrix (stiffness, tangent, ...). If element has no capability to compute requested type of characteristic matrix error function is invoked.
type	Id of characteristic component requested.
tStep	Time step when answer is computed.

Reimplemented from oofem::Element.

Definition at line 83 of file cbselement.C.

References computeConsistentMassMtrx(), and OOFEM_ERROR.

void oofem::CBSElement::giveCharacteristicVector	(	FloatArray &	answer,
		CharType	type,
		ValueModeType	mode,
		TimeStep *	tStep
	)

virtual

Computes characteristic vector of receiver of requested type in given time step.

If element has no capability to compute requested type of characteristic vector error function is invoked.

Parameters

answer	Requested characteristic vector.
type	Id of characteristic component requested.
mode	Determines mode of answer.
tStep	Time step when answer is computed.

Reimplemented from oofem::Element.

Definition at line 98 of file cbselement.C.

References computeDiagonalMassMtrx(), and OOFEM_ERROR.

void oofem::CBSElement::giveInputRecord ( DynamicInputRecord & input )

virtual

Setups the input record string of receiver.

Parameters

input Dynamic input record to be filled by receiver.

Reimplemented from oofem::Element.

Reimplemented in oofem::TR1_2D_CBS.

Definition at line 72 of file cbselement.C.

References _IFT_CBSElement_bcodes, _IFT_CBSElement_bsides, boundaryCodes, boundarySides, oofem::Element::giveInputRecord(), oofem::IntArray::giveSize(), and oofem::DynamicInputRecord::setField().

Referenced by oofem::TR1_2D_CBS::giveInputRecord().

int oofem::CBSElement::giveInternalStateAtNode	(	FloatArray &	answer,
		InternalStateType	type,
		InternalStateMode	mode,
		int	node,
		TimeStep *	tStep
	)

virtual

Returns internal state variable (like stress,strain) at node of element in Reduced form, the way how is obtained is dependent on InternalValueType.

The value may be local, or smoothed using some recovery technique. Returns zero if element is unable to respond to request.

Parameters

answer	Contains result, zero sized if not supported.
type	Determines the internal variable requested (physical meaning).
mode	Determines the mode of variable (recovered, local, ...).
node	Node number, for which variable is required.
tStep	Time step.

Returns: Nonzero if o.k, zero otherwise.

Reimplemented from oofem::Element.

Reimplemented in oofem::TR1_2D_CBS.

Definition at line 168 of file cbselement.C.

References oofem::FloatArray::at(), oofem::DofManager::end(), oofem::DofManager::findDofWithDofId(), oofem::Element::giveInternalStateAtNode(), oofem::Element::giveNode(), oofem::Element::giveSpatialDimension(), and oofem::FloatArray::resize().

Referenced by oofem::TR1_2D_CBS::giveInternalStateAtNode().

IRResultType oofem::CBSElement::initializeFrom ( InputRecord * ir )

virtual

Initializes receiver according to object description stored in input record.

This function is called immediately after creating object using constructor. Input record can be imagined as data record in component database belonging to receiver. Receiver may use value-name extracting functions to extract particular field from record.

See also: IR_GIVE_FIELD; IR_GIVE_OPTIONAL_FIELD

Parameters

ir	Input record to initialize from.

Returns: IRResultType

Reimplemented from oofem::Element.

Reimplemented in oofem::TR1_2D_CBS.

Definition at line 58 of file cbselement.C.

References _IFT_CBSElement_bcodes, _IFT_CBSElement_bsides, boundaryCodes, boundarySides, oofem::Element::initializeFrom(), IR_GIVE_FIELD, IR_GIVE_OPTIONAL_FIELD, and oofem::IntArray::isEmpty().

Referenced by oofem::TR1_2D_CBS::initializeFrom().

void oofem::CBSElement::updateInternalState ( TimeStep * tStep )

virtual

Updates element state after equilibrium in time step has been reached.

Default implementation updates all integration rules defined by integrationRulesArray member variable. Doing this, all integration points and their material statuses are updated also. All temporary history variables, which now describe equilibrium state are copied into equilibrium ones. The existing internal state is used for update.

Parameters

tStep Time step for newly reached state.